[Asterisk-Users] Teliax users, g729 question
Chris Coulthurst
asterisk at shuksan.com
Sat Oct 8 08:56:12 MST 2005
Make sure you have g729 turned on from the Teliax customer panel on their
website.
Chris Coulthurst
chris at shuksan.com
----- Original Message -----
From: "Rich Adamson" <radamson at routers.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>; "John Reynolds" <reynoldsjc at gmail.com>
Sent: Saturday, October 08, 2005 8:59 AM
Subject: Re: [Asterisk-Users] Teliax users, g729 question
>> I am using Teliax to terminate my calls, and I have 3 licenses' for
>> g729 from Digium. "show translations" verifies that the registration
>> took place.
>>
>> When I place a call, having "allow=g729" as the only allow option in
>> iax.conf, I get the following error:
>>
>> WARNING[361]: chan_iax2.c:6017 socket_read: Call rejected by
>> 208.139.204.228: Unable to negotiate codec
>>
>> If I place a call with g726 as the only allow line, then the call
>> completes as desired. I realize I could just use that (g726), but
>> it seems odd that I cannot connect using g729 when both of us support
>> it.
>>
>> I have checked, double checked, triple checked my account with teliax,
>> and made sure that the g729 box is checked for both sip and iax. I
>> have also contacted support, they have responded, but not with
>> anything that would be considered helpful.
>>
>> My question then to you all is this: Are you connecting to Teliax via
>> g729? if so, how... what are you doing that I might be missing?
>>
>> Your guidance will be most appreciated.
>
> I just tried g729 with teliax this morning. It worked fine in both
> directions using three different did's from them. I did have one
> test call where audio was one way though.
>
> During those test calls I watched the CLI and the calls definitely
> were g729 without a doubt. I used the exact same teliax server you
> show above.
>
> I'm running cvs-head from yesterday.
>
> If you do a iax2 debug, you should be able to spot which system is
> not compat with g729. That should lead you into diagnosing the
> problem a little deeper.
>
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list