[Asterisk-Users] system crash

[Giordano Grandis]

Hi! 

I'm using bristuff-0.2.0-RC7k with 2 hfc single bri pci card. I load the
zapata module but whrn i try to load the zaphfc module by this command
("insmod /usr/src/bristuff-0.2.0-RC7k/zaphfc/./zaphfc.o") my system
crash and froze, i have to reboot it. 

This is my interrupts: 

          CPU0 
 0:     232589          XT-PIC  timer 
 1:        267          XT-PIC  keyboard 
 2:          0          XT-PIC  cascade 
 8:          1          XT-PIC  rtc 
 9:          0          XT-PIC  usb-uhci 
11:          0          XT-PIC  VIA8233, usb-uhci, usb-uhci 
12:       6229          XT-PIC  eth0, ehci_hcd, PS/2 Mouse 
14:       2267          XT-PIC  ide0 
NMI: 0 
ERR: 0 

ah this is my /proc/pci 

 Bus  0, device  19, function  0: 
   Network controller: Cologne Chip Designs GmbH ISDN network controller
<A&NBSP;&NBSP;HREF='HFC-PCI'>HFC-PCI (rev 2). 
     IRQ 12. 
     Master Capable.  Latency=16.  Max Lat=16. 
     I/O at 0xdc00 <A&NBSP;&NBSP;HREF='0XDC07'>0xdc07. 
     Non-prefetchable 32 bit memory at 0xde003000
<A&NBSP;&NBSP;HREF='0XDE0030FF'>0xde0030ff. 
 Bus  0, device  20, function  0: 
   Network controller: Cologne Chip Designs GmbH ISDN network controller
<A&NBSP;&NBSP;HREF='HFC-PCI'>HFC-PCI (#2) (rev 2). 
     IRQ 9. 
     Master Capable.  Latency=16.  Max Lat=16. 
     I/O at 0xe000 <A&NBSP;&NBSP;HREF='0XE007'>0xe007. 
     Non-prefetchable 32 bit memory at 0xde004000
<A&NBSP;&NBSP;HREF='0XDE0040FF'>0xde0040ff. 
 Bus  1, device   0, function  0: 

Thanks

 

Giordano

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051006/bc3b59d4/attachment.htm