[Asterisk-Users] Newbie question

[Ron Wellsted]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hamish Whittal wrote:
> Hi folks,
> 
> I have an asuscom ISDN BRI card in my server and was wanting to know
> whether this would be good enough to use with Asterisk. I am VERY new to
> this, so have no idea how to config the software, etc. But I am very
> eager to learn.
> 
> Cheers
> H

This should work fine with ISDN4Linux as it uses the Hisax chipset.  Get
it working first as a normal ISDN card, then add Asterisk.  Look at
/etc/asterisk/modem.conf, it will need to contain something like this:

[interfaces]
context=inbound
driver=i4l
language=en
type=autodetect
stripmsd=0
dialtype=tone
mode=immediate
msn=yourMSNhere
group=9
dtmfmode=asterisk
incomingmsn=*
device => /dev/ttyI0
device => /dev/ttyI1

You _WILL_ need to set your MSN (change yourMSNhere to your full MSN,
usually without the area code).

HTH

- --
Ron Wellsted
http://www.wellsted.org.uk
ron at wellsted.org.uk
FWD:519961  Gossiptel:9309811
N 52.567623, W 2.137621
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iQEVAwUBQpOLWEtP/KMNOfRbAQKyMwf5AWyv903Zk04g9g/lNGIErfDdQHlo7Vr7
lThVhfMScoW5PlFI3UIVjjzikwZYsqYUBL0aEevFa64hV40u84ZzQ0WbgLzTekgB
qPOaFXwzI//D7GQUOcKpA9ydlWYv7y16BQ2lgj93DP/xttImu6qf+HwF2vzhYMmE
TxC2CUkU3zeMnFYy3QGBHPyVJVH+jRD5C3jgnnWfGeUVYBjQhVA3PQHZ+nLw/Ip+
3Iv5R4wcDrtM1F08ZLkH1NJ2D07NvmkasglEyaJlCDBh6LGyBexuiSjUAn8cxH3Z
3cfmDfKtWjAFZV060LyAnQQYAmhrnDc88/HRbIzHTVJJ6/+uPduHMQ==
=9O75
-----END PGP SIGNATURE-----