[Asterisk-Users] Re: Red Alarm TE110P

[Huddleston, Robert]

I thought the HDSL device acts as an American SmartJack to terminate T1/E1
type services.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Remco Barende
Sent: Tuesday, May 24, 2005 2:33 PM
To: Asterisk Users List
Subject: [Asterisk-Users] Re: Red Alarm TE110P

Sorry, forgot one possibly important detail:

The old PBX was connected to the PRI via a 'HDSL Desktop unit E1'. I just 
yanked out the cable into the HDSL desktop unit and stuffed it into the 
TE110P directly.

I assume that's correct and I do not need the HDSL thingy, or do I??

Or do I need to connect the TE110P with another cable from the HDSL thingy 
out to the TE110P (could I use a standard UTP cable??)

Thanks!!


On Tue, 24 May 2005, Remco Barende wrote:

> Hi!
>
> I'm trying to setup a Wildcard TE110P with a PRI in The Netherlands.
>
> I get a Red Alarm on the line.
>
> Is there any way of debugging this? I've tried some configs that should
work 
> but without success. Is there any way of telling if the cabling is correct
or 
> what else the problem could be?
>
> Thanks!!
> Remco
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users