[Asterisk-Users] SIPURA SPA-2000 webserver dead after firmware upgrade

[David Boyd]

Run nmap against the ip address and see what ports are active for tcp
service. Maybe you can connect via a different port (I know it should be
80), and see if the configuration is different between voice and web

dave
On Tue, 2005-05-10 at 21:50 -0400, Steve Prior wrote:
> I just got a refurb Sipura SPA-2000 and was able to assign it an IP
> address with DHCP and ping the device, but then I ran the firmware 
> upgrade utility to bring it up to spa2k-2.0.13g which seemed to
> work just fine, but after it rebooted I cannot connect to its
> webserver for configuration.  I can still ping the unit.  When
> I use the built in voice menu it reads back the right IP address,
> webserver port, and claims the webserver is enabled, but I can't
> connect to port 80 on the device and running the firmware upgrade
> utility says that it cannot connect to the unit either.
> 
> Has anyone seen something like that and is there a fix?  A google
> search didn't turn up any apparent hits.
> 
> Thanks
> Steve
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users