[Asterisk-Users] can't create Zap channel

[Tomasz Chmielewski]

Matthew Boehm wrote:
> Before you jump ahead, yes I do have chan_zap.so loaded..
> 
> Call Flow:  Asterisk 1 --IAX2--> Asterisk 2 ---> PRI
> 
>     -- Accepting AUTHENTICATED call from 22.22.22.22:
>        > requested format = ulaw,
>        > requested prefs = (),
>        > actual format = ulaw,
>        > host prefs = (ulaw|alaw|gsm),
>        > priority = mine
>     -- Executing Dial("IAX2/asterisk-alpha at asterisk-alpha-3",
> "Zap/R1d/18005551212|60") in new stack
> May  5 15:21:37 NOTICE[16153]: app_dial.c:968 dial_exec_full: Unable to
> create channel of type 'Zap' (cause 0)
>   == Everyone is busy/congested at this time (1:0/0/1)
>     -- Hungup 'IAX2/asterisk-alpha at asterisk-alpha-3'
> 
> 
> pri debug is irrelevent because the call never makes it to pri. What is
> cause 0? Its not listed in the header files.
> 
> Nothing is busy on that span.
> 
> Any ideas?

yes, I was struggling with that for a long time recently, too, so maybe 
I could help.

first, let me know, if you can dial yourself? (i.e. PSTN -> * - that 
(zap) card)

Tomek

----------------------------------------------------------------------
Znajdz swoja milosc na wiosne... >>> http://link.interia.pl/f187a