[Asterisk-Users] TDM400P Not loading Drivers

[Greg]

Thankyou. That did the trick. I must have got confused with zaptel and 
zapata conf files with an example.

Regards,
Greg
On 18/03/2005, at 10:38 PM, Rich Adamson wrote:

> Inline...
>
>> I am trying to get the drivers working with this device with 4 fxo
>> modules on it. I do a modprobe zaptel and no errors appear. But when I
>> do modprobe wctdm the following errors appear:
>>
>> Notice: Configuration file is /etc/zaptel.conf
>> line 4: Cannot get number of tones chanel 1
>> line 4: Cannot init tones chanel 1
>> line 4: Cannot get number of tones chanel 2
>> line 4: Cannot init tones chanel 2
>> line 4: Cannot get number of tones chanel 3
>> line 4: Cannot init tones chanel 3
>> line 4: Cannot get number of tones chanel 4
>> line 4: Cannot init tones chanel 4
>>
>> 8 error(s) detected
>>
>> /lib/modules/2.4.22-2f/misc/wctdm.o: post-install wctdm failed
>> /lib/modules/2.4.22-2f/misc/wctdm.o: insmod wctdm failed
>>
>>
>> I have googled the mailing lists and have not been able to find
>> anything on these errors.
>>
>> My config of zaptel.conf
>>
>> fxsks=1-4
>> loadzone=au
>> defaultzone=au
>> channels=1-4
>
> Unless the above is a typo, "channels=1-4" should not be in this file;
> only the first three lines
>
>> zapata.conf
>>
>> [channels]
>> language=en
>>
>> ; XTDM20B Port #1,2 plugged into PSTN
>> ;
>> context=from-1800
>> signalling=fxs_ks
>> faxdetect=incoming
>> usecallerid=yes
>> echocancel=yes
>> echocancelwhenbridged=no
>> group=1
>> channel=1
>
> Not sure about the syntax of "channel=1"; I know channel=>1 works 
> though.
>
>> context=from-pstn
>> signalling=fxs_ks
>> faxdetect=incoming
>> usecallerid=yes
>> echocancel=yes
>> echocancelwhenbridged=no
>> echotraining=800
>> group=3
>> channel=2-3
>>
>> context=from-fax
>> signalling=fxs_ks
>> faxdetect=incoming
>> usecallerid=yes
>> echocancel=yes
>> echocancelwhenbridged=no
>> echotraining=800
>> group=3
>> channel=4
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>