[Asterisk-Users] TDM400P Not loading Drivers

[Greg]

I am trying to get the drivers working with this device with 4 fxo 
modules on it. I do a modprobe zaptel and no errors appear. But when I 
do modprobe wctdm the following errors appear:

Notice: Configuration file is /etc/zaptel.conf
line 4: Cannot get number of tones chanel 1
line 4: Cannot init tones chanel 1
line 4: Cannot get number of tones chanel 2
line 4: Cannot init tones chanel 2
line 4: Cannot get number of tones chanel 3
line 4: Cannot init tones chanel 3
line 4: Cannot get number of tones chanel 4
line 4: Cannot init tones chanel 4

8 error(s) detected

/lib/modules/2.4.22-2f/misc/wctdm.o: post-install wctdm failed
/lib/modules/2.4.22-2f/misc/wctdm.o: insmod wctdm failed


I have googled the mailing lists and have not been able to find 
anything on these errors.

My config of zaptel.conf

fxsks=1-4
loadzone=au
defaultzone=au
channels=1-4


zapata.conf

[channels]
language=en

; XTDM20B Port #1,2 plugged into PSTN
;
context=from-1800
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
group=1
channel=1

context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=3
channel=2-3

context=from-fax
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=3
channel=4


Has anyone seen this problem before? Does anyone know a cure?


Any help is greatly appreciated.

Regards,
Greg