[Asterisk-Users] Newbie can't dial out to pstn

[Greg]

I have just run ztcfg and got these errors:

# ztcfg
Notice: Configuration file is /etc/zaptel.conf
line 209: Cannot get number of tones chanel 1
line 209: Cannot init tones chanel 1
line 209: Cannot get number of tones chanel 2
line 209: Cannot init tones chanel 2
line 209: Cannot get number of tones chanel 3
line 209: Cannot init tones chanel 3
line 209: Cannot get number of tones chanel 4
line 209: Cannot init tones chanel 4

What would these mean. I searched the archives and couldn't find these 
errors.

Greg

On 18/03/2005, at 1:24 PM, Greg wrote:

> I was just copy an example from somewhere. I made the change but the 
> mobile still doesn't ring. The line the card is attached to works 
> fine. here is the new output
>
> Executing Goto("SIP/2002-4385", "mobile|0400039953|1") in new stack
>     -- Goto (mobile,0400039953,1)
>     -- Executing Goto("SIP/2002-4385", "localcall|0400039953|1") in 
> new stack
>     -- Goto (localcall,0400039953,1)
>     -- Executing Dial("SIP/2002-4385", "ZAP/1/0400039953|60|r") in new 
> stack
>     -- Called 1/0400039953
>     -- Zap/1-1 answered SIP/2002-4385
>     -- Hungup 'Zap/1-1'
>   == Spawn extension (localcall, 0400039953, 1) exited non-zero on 
> 'SIP/2002-4385'
>
> is this line -- Zap/1-1 answered SIP/2002-4385 displayed when the card 
> tries to make the call or when the card thinks it has established the 
> call?
>
> Regards,
> Greg
>
> By the way, I'm on the Gold Coast.
>
> On 18/03/2005, at 12:32 PM, Shane Dalgleish wrote:
>
>> Greg,
>>
>> Any reason why you are putting the country code on the front for a 
>> mobile
>> call through pstn?
>> (Unless you have something like an Ericsson F220M Fixed Cellular 
>> Terminal
>> connected to it?)
>>
>> And you said the tdm400p never tries to pick up the phone?
>> Have you connected a normal phone on the line and had a listen?
>>
>>
>> Where is Aus are you? :o)
>>
>> Cheers
>> Shane
>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com
>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Greg
>>> Sent: Friday, 18 March 2005 1:01 PM
>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Subject: [Asterisk-Users] Newbie can't dial out to pstn
>>>
>>> Hi,
>>> I have just put in a tdm400p with 4 fxo modules and am trying
>>> to dial out from x-lite to dial my mobile phone just to test.
>>>
>>> The output in the asterisk console is like this
>>>
>>> Executing Goto("SIP/2002-239b", "mobile|61400039953|1") in new stack
>>>      -- Goto (mobile,61400039953,1)
>>>      -- Executing Goto("SIP/2002-239b",
>>> "localcall|61400039953|1") in new stack
>>>      -- Goto (localcall,61400039953,1)
>>>      -- Executing Dial("SIP/2002-239b",
>>> "ZAP/1/61400039953|60|r") in new stack
>>>      -- Called 1/61400039953
>>>      -- Zap/1-1 answered SIP/2002-239b
>>>      -- Hungup 'Zap/1-1'
>>>    == Spawn extension (localcall, 61400039953, 1) exited
>>> non-zero on 'SIP/2002-239b'
>>>
>>> It never tries to pick up the phone and dial out. I'm not
>>> sure if the config is correct, but I can easily dial between
>>> x-lite clients, just not get the pstn.
>>>
>>> Can anyone see any glaring mistakes?
>>>
>>> Any help is grealty appreciated.
>>>
>>> Regards,
>>> Greg
>>>
>>> My extensions.conf part is this:
>>>
>>> exten => _04XXXXXXXX,1,GoTo(mobile,61${EXTEN:1},1)
>>>
>>> [localcall] ; local calls by PSTN ?is a fixed charge, voip is
>>> per minute exten => _X.,1,Dial(ZAP/1/${EXTEN},60,r) exten =>
>>> _X.,2,Congestion exten => _X.,3,Hangup exten =>
>>> _X.,103,Hangup exten => _X.,104,Hangup exten => _X.,105,Hangup
>>>
>>> [mobile] ; Maybe be cheaper to route mobile calls differently
>>> to STD in some cases exten => _X.,1,Goto(localcall,${EXTEN},1)
>>>
>>> zaptel.conf
>>> fxsks=1-4
>>> loadzone=au
>>> defaultzone=au
>>> channels=1-4
>>>
>>> zapata.conf
>>> [channels]
>>>  
>>> busydetect=1
>>> busycount=7
>>>  
>>> relaxdtmf=yes
>>> callwaiting=yes
>>> callwaitingcallerid=yes
>>> threewaycalling=yes
>>> transfer=yes
>>> cancallforward=yes
>>>  
>>> usecallerid=yes
>>>  
>>> echocancel=yes
>>> echocancelwhenbridged=yes
>>>  
>>> rxgain=0.0
>>> txgain=0.0
>>>  
>>> group=1
>>> pickupgroup=1-4
>>>  
>>> immediate=no
>>>  
>>> context=incomingcall
>>>  
>>> signalling=fxs_ks
>>> callerid=asreceived
>>> channel=1-4
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>