[Asterisk-Users] Newbie can't dial out to pstn

[Greg]

I was just copy an example from somewhere. I made the change but the 
mobile still doesn't ring. The line the card is attached to works fine. 
here is the new output

Executing Goto("SIP/2002-4385", "mobile|0400039953|1") in new stack
     -- Goto (mobile,0400039953,1)
     -- Executing Goto("SIP/2002-4385", "localcall|0400039953|1") in new 
stack
     -- Goto (localcall,0400039953,1)
     -- Executing Dial("SIP/2002-4385", "ZAP/1/0400039953|60|r") in new 
stack
     -- Called 1/0400039953
     -- Zap/1-1 answered SIP/2002-4385
     -- Hungup 'Zap/1-1'
   == Spawn extension (localcall, 0400039953, 1) exited non-zero on 
'SIP/2002-4385'

is this line -- Zap/1-1 answered SIP/2002-4385 displayed when the card 
tries to make the call or when the card thinks it has established the 
call?

Regards,
Greg

By the way, I'm on the Gold Coast.

On 18/03/2005, at 12:32 PM, Shane Dalgleish wrote:

> Greg,
>
> Any reason why you are putting the country code on the front for a 
> mobile
> call through pstn?
> (Unless you have something like an Ericsson F220M Fixed Cellular 
> Terminal
> connected to it?)
>
> And you said the tdm400p never tries to pick up the phone?
> Have you connected a normal phone on the line and had a listen?
>
>
> Where is Aus are you? :o)
>
> Cheers
> Shane
>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Greg
>> Sent: Friday, 18 March 2005 1:01 PM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: [Asterisk-Users] Newbie can't dial out to pstn
>>
>> Hi,
>> I have just put in a tdm400p with 4 fxo modules and am trying
>> to dial out from x-lite to dial my mobile phone just to test.
>>
>> The output in the asterisk console is like this
>>
>> Executing Goto("SIP/2002-239b", "mobile|61400039953|1") in new stack
>>      -- Goto (mobile,61400039953,1)
>>      -- Executing Goto("SIP/2002-239b",
>> "localcall|61400039953|1") in new stack
>>      -- Goto (localcall,61400039953,1)
>>      -- Executing Dial("SIP/2002-239b",
>> "ZAP/1/61400039953|60|r") in new stack
>>      -- Called 1/61400039953
>>      -- Zap/1-1 answered SIP/2002-239b
>>      -- Hungup 'Zap/1-1'
>>    == Spawn extension (localcall, 61400039953, 1) exited
>> non-zero on 'SIP/2002-239b'
>>
>> It never tries to pick up the phone and dial out. I'm not
>> sure if the config is correct, but I can easily dial between
>> x-lite clients, just not get the pstn.
>>
>> Can anyone see any glaring mistakes?
>>
>> Any help is grealty appreciated.
>>
>> Regards,
>> Greg
>>
>> My extensions.conf part is this:
>>
>> exten => _04XXXXXXXX,1,GoTo(mobile,61${EXTEN:1},1)
>>
>> [localcall] ; local calls by PSTN ?is a fixed charge, voip is
>> per minute exten => _X.,1,Dial(ZAP/1/${EXTEN},60,r) exten =>
>> _X.,2,Congestion exten => _X.,3,Hangup exten =>
>> _X.,103,Hangup exten => _X.,104,Hangup exten => _X.,105,Hangup
>>
>> [mobile] ; Maybe be cheaper to route mobile calls differently
>> to STD in some cases exten => _X.,1,Goto(localcall,${EXTEN},1)
>>
>> zaptel.conf
>> fxsks=1-4
>> loadzone=au
>> defaultzone=au
>> channels=1-4
>>
>> zapata.conf
>> [channels]
>>  
>> busydetect=1
>> busycount=7
>>  
>> relaxdtmf=yes
>> callwaiting=yes
>> callwaitingcallerid=yes
>> threewaycalling=yes
>> transfer=yes
>> cancallforward=yes
>>  
>> usecallerid=yes
>>  
>> echocancel=yes
>> echocancelwhenbridged=yes
>>  
>> rxgain=0.0
>> txgain=0.0
>>  
>> group=1
>> pickupgroup=1-4
>>  
>> immediate=no
>>  
>> context=incomingcall
>>  
>> signalling=fxs_ks
>> callerid=asreceived
>> channel=1-4
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>