[Asterisk-Users] Asterisk@Home, AMP, and Broadvoice

[Dalon Westergreen]

mine works fine.  I configured it entirely through amp.  I will post
my config tonight.


On Thu, 10 Mar 2005 18:09:12 -0600, James Taylor <jltaylor at metrotel.net> wrote:
> Put this in sip.conf with the phpconfig:
> 
> register =>
> phone_number at sip.broadvoice.com:password:phone_number at sip.broadvoice.com/phone_number
> [sip.broadvoice.com]
> type=peer
> user=phone
> host=sip.broadvoice.com
> fromdomain=sip.broadvoice.com
> fromuser=phone_number
> secret=password
> username=phone_number
> insecure=very
> context=from-pstn
> authname=phone_number
> dtmfmode=inband
> dtmf=inband
> ;Disable canreinvite if you are behind a NAT
> canreinvite=no
> 
> Then go into AMP and set up your DID number and point it to an extension.
> 
> I never could get the SIP in AMP to work properly.
> 
> James
> 
> On Thu, 10 Mar 2005 18:32:09 -0500, Tom Rymes <trymes at rymesheating.com>
> wrote:
> 
> > Egad, not again with Broadvoice! Anyhow, I recently installed AAH and
> > configured my TDM11B and got that and some SIP phones working. I still
> > have some issues to work out, etc, but my current problem is Broadvoice.
> >
> > I have checked out all of the online resources, including the recent
> > list exchange about the recent changes made by Broadvoice. However, the
> > one thing I have found to be consitent in all of the online info is that
> > nothing consistently works....
> >
> > I have tried to combine the tutorial by William Pool at
> > http://lists.digium.com/pipermail/asterisk-users/2005-January/086337.htm
> > l with the latest instructions from Dan Weber at
> > http://foo.robotics.net/mediawiki-1.3.10/index.php/Asterisk_Setup . This
> > has not worked. Right now, "sip show registry" shows this:
> >
> > Host                            Username       Refresh State
> > sip.broadvoice.com:5060         6033751414 at s       120 Auth. Sent
> >
> > I added this to my sip.conf:
> >
> > externip=xxx.xxx.xxx.xxx
> > localnet=10.1.0.0
> > localmask=255.255.0.0
> > nat=yes
> > My /etc/asterisk/sip_additional.conf contains this relevant portion:
> >
> > register=>
> > nnnnnnnnnn at sip.broadvoice.com:pppppppppp:nnnnnnnnnn at sip.broadvoice.com/2
> > 00
> >
> > [from-broadvoice]
> > username=nnnnnnnnnn
> > user=nnnnnnnnnn
> > type=user
> > secret=pppppppppp
> > nat=yes
> > insecure=very
> > host=sip.broadvoice.com
> > fromdomain=sip.broadvoice.com
> > dtmfmode=inband
> > context=from-pstn
> >
> > [sip.broadvoice.com]
> > username=nnnnnnnnnn
> > user=nnnnnnnnnn
> > type=peer
> > secret=pppppppppp
> > nat=yes
> > insecure=very
> > host=sip.broadvoice.com
> > fromuser=nnnnnnnnnn
> > fromdomain=sip.broadvoice.com
> > dtmfmode=inband
> > dtmf=inband
> > context=from-pstn
> > canreinvite=no
> > authname=nnnnnnnnnn
> >
> > Here are my two questions:
> >
> > 1.) Does anyone have a summary of what to input into AMP to properly
> > setup Broadvoice? The tutorial by William Pool looked hopeful, but no
> > such luck.
> >
> > 2.) Can anyone see the painfully obvious screwup I made here? For
> > whatever reason this isn't working, and I can't find any consistent
> > answers on Broadvoice.
> >
> > Thank you for your consideration, I have been documenting my progress so
> > I can share the results with the community once completed.
> >
> > Tom
> >
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> --
> James Taylor
> MetroTel
> 3505 Summerihll Road
> Suite 11
> Texarkana, Texas  75503
> 903-793-1956
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>