[Asterisk-Users] Asterisk@Home, AMP, and Broadvoice

[James Taylor]

Put this in sip.conf with the phpconfig:

register =>  
phone_number at sip.broadvoice.com:password:phone_number at sip.broadvoice.com/phone_number
[sip.broadvoice.com]
type=peer
user=phone
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com
fromuser=phone_number
secret=password
username=phone_number
insecure=very
context=from-pstn
authname=phone_number
dtmfmode=inband
dtmf=inband
;Disable canreinvite if you are behind a NAT
canreinvite=no

Then go into AMP and set up your DID number and point it to an extension.

I never could get the SIP in AMP to work properly.

James


On Thu, 10 Mar 2005 18:32:09 -0500, Tom Rymes <trymes at rymesheating.com>  
wrote:

> Egad, not again with Broadvoice! Anyhow, I recently installed AAH and
> configured my TDM11B and got that and some SIP phones working. I still
> have some issues to work out, etc, but my current problem is Broadvoice.
>
> I have checked out all of the online resources, including the recent
> list exchange about the recent changes made by Broadvoice. However, the
> one thing I have found to be consitent in all of the online info is that
> nothing consistently works....
>
> I have tried to combine the tutorial by William Pool at
> http://lists.digium.com/pipermail/asterisk-users/2005-January/086337.htm
> l with the latest instructions from Dan Weber at
> http://foo.robotics.net/mediawiki-1.3.10/index.php/Asterisk_Setup . This
> has not worked. Right now, "sip show registry" shows this:
>
> Host                            Username       Refresh State
> sip.broadvoice.com:5060         6033751414 at s       120 Auth. Sent
>
> I added this to my sip.conf:
>
> externip=xxx.xxx.xxx.xxx
> localnet=10.1.0.0
> localmask=255.255.0.0
> nat=yes
> My /etc/asterisk/sip_additional.conf contains this relevant portion:
>
> register=>
> nnnnnnnnnn at sip.broadvoice.com:pppppppppp:nnnnnnnnnn at sip.broadvoice.com/2
> 00
>
> [from-broadvoice]
> username=nnnnnnnnnn
> user=nnnnnnnnnn
> type=user
> secret=pppppppppp
> nat=yes
> insecure=very
> host=sip.broadvoice.com
> fromdomain=sip.broadvoice.com
> dtmfmode=inband
> context=from-pstn
>
> [sip.broadvoice.com]
> username=nnnnnnnnnn
> user=nnnnnnnnnn
> type=peer
> secret=pppppppppp
> nat=yes
> insecure=very
> host=sip.broadvoice.com
> fromuser=nnnnnnnnnn
> fromdomain=sip.broadvoice.com
> dtmfmode=inband
> dtmf=inband
> context=from-pstn
> canreinvite=no
> authname=nnnnnnnnnn
>
> Here are my two questions:
>
> 1.) Does anyone have a summary of what to input into AMP to properly
> setup Broadvoice? The tutorial by William Pool looked hopeful, but no
> such luck.
>
> 2.) Can anyone see the painfully obvious screwup I made here? For
> whatever reason this isn't working, and I can't find any consistent
> answers on Broadvoice.
>
> Thank you for your consideration, I have been documenting my progress so
> I can share the results with the community once completed.
>
> Tom
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
James Taylor
MetroTel
3505 Summerihll Road
Suite 11
Texarkana, Texas  75503
903-793-1956