[Asterisk-Users] X100P Clone, Which one?

[Androtech]

Hi All,

Googling X100P Clone I found several information about these cards and seems that some winmodem has the same chip used from the original X100P.
Here below a list winmodem which should work as X100P clone:

1057 Motorola
5608 SM56 PCI Fax Voice Modem
E159 Tiger Jet Network Inc
0001 Tiger 300/320 PCI interface

I bought one "Trust 56k V92 PCI Internal Modem MD-1100" which has the 1057 Motorola Chip, and I installed it on my linux box.

in my /proc/pci list it is recognized like 1057:3052 (Motorola) (rev 4)., IRQ 11, I/O at 0x6c00 [0x6cff]

When I try to load the module wcfxo, I cannot load it (zaptel is already loaded):

[root at Hayabusa misc]# modprobe wcfxo
/lib/modules/2.4.22/misc/wcfxo.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
modprobe: insmod /lib/modules/2.4.22/misc/wcfxo.o failed
modprobe: insmod wcfxo failed

I cannot undertand if:

1) the message occours because the FXO card use the same IRQ of the VGA card
2) it occurs because the winmodem installed is not a valid FXO card.

Some one as experienced this kind of card?

Regards


MY PCI DEVICES:

[root at Hayabusa root]# cat /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 3).
      Master Capable.  Latency=64.
      Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 3).
      Master Capable.  Latency=64.  Min Gnt=129.
  Bus  0, device   7, function  0:
    ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 2).
  Bus  0, device   7, function  1:
    IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 1).
      Master Capable.  Latency=64.
      I/O at 0xf000 [0xf00f].
  Bus  0, device   7, function  2:
    USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
      IRQ 11.
      Master Capable.  Latency=64.
      I/O at 0x6400 [0x641f].
  Bus  0, device   7, function  3:
    Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 2).
      IRQ 9.
  Bus  0, device  10, function  0:
    Ethernet controller: 3Com Corporation 3c590 10BaseT [Vortex] (rev 0).
      IRQ 10.
      Master Capable.  Latency=248.  Min Gnt=3.Max Lat=8.
      I/O at 0x6800 [0x681f].
  Bus  0, device  13, function  0:
    VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG [Mystique] (rev 2).
      IRQ 11.
      Master Capable.  Latency=64.
      Non-prefetchable 32 bit memory at 0xe8000000 [0xe8003fff].
      Prefetchable 32 bit memory at 0xe9000000 [0xe97fffff].
      Non-prefetchable 32 bit memory at 0xea000000 [0xea7fffff].
  Bus  0, device  14, function  0:
    Modem: PCI device 1057:3052 (Motorola) (rev 4).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=1.Max Lat=62.
      Non-prefetchable 32 bit memory at 0xeb000000 [0xeb000fff].
      I/O at 0x6c00 [0x6cff].
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050305/bc973d10/attachment.htm