<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2604" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi All,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Googling X100P Clone I found several information
about these cards and seems that some winmodem has the same chip used from the
original X100P.</FONT></DIV>
<DIV><FONT face=Arial size=2>Here below a list winmodem which should work as
X100P clone:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>1057 Motorola<BR>5608 SM56 PCI Fax Voice
Modem<BR>E159 Tiger Jet Network Inc<BR>0001 Tiger 300/320 PCI
interface</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I bought one<STRONG> </STRONG>"Trust 56k V92
PCI Internal Modem MD-1100" which has the 1057 Motorola Chip, and I installed it
on my linux box.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>in my /proc/pci list it is recognized like
1057:3052 (Motorola) (rev 4)., IRQ 11, I/O at 0x6c00 [0x6cff]</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>When I try to load the module wcfxo, I cannot load
it (zaptel is already loaded):</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>[root@Hayabusa misc]# modprobe
wcfxo<BR></FONT><FONT face=Arial size=2>/lib/modules/2.4.22/misc/wcfxo.o:
init_module: No such device<BR>Hint: insmod errors can be caused by incorrect
module parameters, including invalid IO or IRQ
parameters.<BR> You may find more information in
syslog or the output from dmesg<BR>modprobe: insmod
/lib/modules/2.4.22/misc/wcfxo.o failed<BR>modprobe: insmod wcfxo
failed<BR></FONT></DIV>
<DIV><FONT face=Arial size=2>I cannot undertand if:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>1) the message occours because the FXO card use the
same IRQ of the VGA card</FONT></DIV>
<DIV><FONT face=Arial size=2>2) it occurs because the winmodem installed is not
a valid FXO card.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Some one as experienced this kind of
card?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Regards</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>MY PCI DEVICES:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>[root@Hayabusa root]# cat /proc/pci<BR>PCI devices
found:<BR> Bus 0, device 0, function
0:<BR> Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX
Host bridge (rev 3).<BR> Master Capable.
Latency=64.<BR> Prefetchable 32 bit memory at
0xe0000000 [0xe7ffffff].<BR> Bus 0, device 1,
function 0:<BR> PCI bridge: Intel Corp. 440BX/ZX/DX -
82443BX/ZX/DX AGP bridge (rev 3).<BR> Master
Capable. Latency=64. Min Gnt=129.<BR> Bus 0,
device 7, function 0:<BR> ISA bridge: Intel
Corp. 82371AB/EB/MB PIIX4 ISA (rev 2).<BR> Bus 0, device
7, function 1:<BR> IDE interface: Intel Corp.
82371AB/EB/MB PIIX4 IDE (rev 1).<BR> Master
Capable. Latency=64.<BR> I/O at 0xf000
[0xf00f].<BR> Bus 0, device 7, function
2:<BR> USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB
(rev 1).<BR> IRQ
11.<BR> Master Capable.
Latency=64.<BR> I/O at 0x6400 [0x641f].<BR>
Bus 0, device 7, function 3:<BR>
Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev
2).<BR> IRQ 9.<BR> Bus 0, device
10, function 0:<BR> Ethernet controller: 3Com
Corporation 3c590 10BaseT [Vortex] (rev 0).<BR>
IRQ 10.<BR> Master Capable.
Latency=248. Min Gnt=3.Max Lat=8.<BR> I/O at
0x6800 [0x681f].<BR> Bus 0, device 13, function
0:<BR> VGA compatible controller: Matrox Graphics, Inc. MGA
1064SG [Mystique] (rev 2).<BR> IRQ
11.<BR> Master Capable.
Latency=64.<BR> Non-prefetchable 32 bit memory at
0xe8000000 [0xe8003fff].<BR> Prefetchable 32 bit
memory at 0xe9000000 [0xe97fffff].<BR>
Non-prefetchable 32 bit memory at 0xea000000 [0xea7fffff].<BR> Bus
0, device 14, function 0:<BR> Modem: PCI device
1057:3052 (Motorola) (rev 4).<BR> IRQ
11.<BR> Master Capable. Latency=64.
Min Gnt=1.Max Lat=62.<BR> Non-prefetchable 32 bit
memory at 0xeb000000 [0xeb000fff].<BR> I/O at
0x6c00 [0x6cff].<BR></FONT></DIV></BODY></HTML>