[Asterisk-Users] X100P connected as extension to Panasonic 616EASA-PHONE

[John Novack]

Guillermo Salas M wrote:

>On Thu, 2005-06-30 at 16:33 +1000, Terry H. Gilsenan wrote:
>  
>
>> 
>>    
>>
>>>-----Original Message-----
>>>From: asterisk-users-bounces at lists.digium.com 
>>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
>>>Jamie Carl
>>>Sent: Thursday, 30 June 2005 2:48 PM
>>>To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>Subject: Re: [Asterisk-Users] X100P connected as extension to 
>>>Panasonic 616EASA-PHONE
>>>
>>>So what you're saying is, you can make inbound/outbound calls on 
>>>asterisk using an X100P connected to the PSTN.   Then you unplug the 
>>>X100P from the PSTN and plug it into a Panasonic 616 PABX and 
>>>suddenly nothing works?  Is that correct?
>>>      
>>>
>
>
>Yes. I get busy tone when I dial the ext conected to the X100P.
>
>  
>
>>>And this is a problem with asterisk because.............?
>>>
>>>I think you'll find the Panasonic box needs some attention...
>>>      
>>>
You need to determine why the X100 is off hook, resulting in your 
Panasonic  returning busy.
Station ports on the 616  are POTS FXS, so it is correct to do what you 
are doing, but for some reason the X100 is off hook.
Make sure you are connected to the line rather than the phone port on 
the X100, also make sure you are using a two wire cord from the 
Panasonic, as the 2nd pair is for Prop Panasonic phones data/power.

Can you ring the extension with the X100 unplugged?

If not, then either a bad station port or a bad cord.

Best of luck

John Novack

>>Actually, I think the problem is that when you plug in the Panasonic, you have two FXO devices connected together, and well that is just not going to
>>work.
>>
>>    
>>
>
>I'm a litle bit confused, the CO on the Panasonic are FXO (because the
>PSTN is connected there) and the internal extensions are FXS (I`ve
>phones FXO connected to the extensions), it is right?
>
>If the X100P is FXO, then I can connect to the internal extensions (like
>a phone)?
>
>Thank you for the help.
>
>  
>
>>It might be a good idea to read this:
>>
>>http://www.digium.com/index.php?menu=fxsvfxo
>>
>>T
>>
>>
>>    
>>
>>>Jamie
>>>
>>>
>>>Guillermo Salas M wrote:
>>>
>>>      
>>>
>>>>Hi all.
>>>>
>>>>I`ve installed a X100P on my box and is working well with 
>>>>        
>>>>
>>>incoming and 
>>>      
>>>
>>>>outgoing calls as a trunk with one PTSN line.
>>>>
>>>>I want to connect the X100P to my Panasonic 616 EASA-PHONE as an 
>>>>internal extension to permit to users to make calls to SIP 
>>>>        
>>>>
>>>devices from 
>>>      
>>>
>>>>analog phones, the problem is when I dial the ext number where the 
>>>>X100P is connected I get busy tone.
>>>>
>>>>What config I need to change to my asterisk files to permit the 
>>>>commented in the last paragraph?
>>>>
>>>>Best Regards,
>>>>
>>>>
>>>>        
>>>>