[Asterisk-Users] X100P connected as extension to Panasonic 616EASA-PHONE

[Guillermo Salas M]

On Thu, 2005-06-30 at 16:33 +1000, Terry H. Gilsenan wrote:
>  
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com 
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> > Jamie Carl
> > Sent: Thursday, 30 June 2005 2:48 PM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] X100P connected as extension to 
> > Panasonic 616EASA-PHONE
> > 
> > So what you're saying is, you can make inbound/outbound calls on 
> > asterisk using an X100P connected to the PSTN.   Then you unplug the 
> > X100P from the PSTN and plug it into a Panasonic 616 PABX and 
> > suddenly nothing works?  Is that correct?


Yes. I get busy tone when I dial the ext conected to the X100P.

> > 
> > And this is a problem with asterisk because.............?
> > 
> > I think you'll find the Panasonic box needs some attention...
> 
> Actually, I think the problem is that when you plug in the Panasonic, you
> have two FXO devices connected together, and well that is just not going to
> work.
> 

I'm a litle bit confused, the CO on the Panasonic are FXO (because the
PSTN is connected there) and the internal extensions are FXS (I`ve
phones FXO connected to the extensions), it is right?

If the X100P is FXO, then I can connect to the internal extensions (like
a phone)?

Thank you for the help.

> It might be a good idea to read this:
> 
> http://www.digium.com/index.php?menu=fxsvfxo
> 
> T
> 
> 
> > 
> > Jamie
> > 
> > 
> > Guillermo Salas M wrote:
> > 
> > >Hi all.
> > >
> > >I`ve installed a X100P on my box and is working well with 
> > incoming and 
> > >outgoing calls as a trunk with one PTSN line.
> > >
> > >I want to connect the X100P to my Panasonic 616 EASA-PHONE as an 
> > >internal extension to permit to users to make calls to SIP 
> > devices from 
> > >analog phones, the problem is when I dial the ext number where the 
> > >X100P is connected I get busy tone.
> > >
> > >What config I need to change to my asterisk files to permit the 
> > >commented in the last paragraph?
> > >
> > >Best Regards,
> > >
> > >
> > >
> > >Guillermo.
> > >
> > >_______________________________________________
> > >Asterisk-Users mailing list
> > >Asterisk-Users at lists.digium.com
> > >http://lists.digium.com/mailman/listinfo/asterisk-users
> > >To UNSUBSCRIBE or update options visit:
> > >   http://lists.digium.com/mailman/listinfo/asterisk-users
> > >  
> > >
> > 
> > 
> > --
> > Jamie Carl
> > Resident Geek
> > Achieve, Corp.
> > 
> > 82 Wentworth Ave
> > Kingston  ACT  2604
> > 
> > PO Box 4833
> > KINGSTON ACT  2604
> > 
> > T 1300 139 215
> > M 0413 955 956
> > F 1800 988 000
> > 
> > W www.achievecorp.com.au
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users