[Asterisk-Users] QuadBRI: How to set the outgoing callerid (KPN - NL)

[Michiel van Baak]

Stijn,

On 21:17, Tue 21 Jun 05, Stijn Jonker wrote:
> Remco, Michiel & others,
> 
> On 21-Jun-2005 0:03, Stijn Jonker wrote:
> > Remco,
> > 
> > On 20-Jun-2005 23:08, Remco Barende wrote:
> > 
> > 
> >>>>On 21:11, Mon 20 Jun 05, Remco Barende wrote:
> >>>>
> >>>>
> >>>>>Are you sure that for the BRI outgoing callerid is allowed?
> >>>
> >>>
> >>>Yep, with pain in the heart i reconnected the KPN ISDN phone directly to
> >>>the NT1 again. Reprogrammed the MSN's and I can dialout with a
> >>>diffrent MSN.
> >>
> >>Did you put :
> >>usecallerid=yes
> >>callerid=asreceived
> >>
> >>In zapata.conf under channels?
> > 
> > 
> > Yes, unfortunatly no change, further troubleshooting (messing around)
> > tomorrow.
> 
> After re-reading the comments in the callerid pages, I saw a remark in
> regards to setting pridialplan & prilocaldialplan to unknown to get
> caller id working in italie.
> 
> It turned out to get outbound callerid working with (quadbri) kpn isdn
> bri line prilocaldialplan needs to be set to unknown. It was at local.
> 
> I'm still trying to find out what the diffrence is, but at least it works.
> 

Thank you for sharing this.
Can this info be put on the wiki page ?
-- 
Michiel van Baak
http://michiel.vanbaak.info
michiel at vanbaak.info
GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x7E0B9A2D

"Two of the most famous products of Berkeley are LSD and BSD. I don't think that this is a coincidence."