[Asterisk-Users] Phantom incoming calls on x100p

[Remco Barende]

Hi!

I have a problem with one box running asterisk, one pots line and an 
X100P. Almost every night the phones give 2-3 rings and then stop. There 
are no actual incoming calls, I verified by putting a device that lists 
the incoming telephone numbers parallell to the X100p and it doesn't 
list any calls.

This is the output on the console for a real incoming call:
  == Spawn extension (inbound-analog, s, 2) exited non-zero on 'Zap/1-1'
    -- Hungup 'Zap/1-1'
    -- Starting simple switch on 'Zap/1-1'
Jun 12 17:20:26 NOTICE[8653]: chan_zap.c:5374 ss_thread: Got event 2 
(Ring/Answered)...
Jun 12 17:20:27 NOTICE[8653]: chan_zap.c:5374 ss_thread: Got event 2 
(Ring/Answered)...
    -- Executing Wait("Zap/1-1", "1") in new stack
    -- Executing Dial("Zap/1-1", "SIP/201&SIP/202|70|tm") in new stack
    -- Called 201
    -- Called 202
    -- SIP/201-1947 is ringing
    -- SIP/202-e2e7 is ringing
    -- SIP/202-e2e7 answered Zap/1-1



This is one of the phantom calls:
== Spawn extension (inbound-analog, s, 2) exited non-zero on 'Zap/1-1'
    -- Hungup 'Zap/1-1'
    -- Starting simple switch on 'Zap/1-1'
Jun 13 02:49:43 WARNING[8653]: chan_zap.c:5445 ss_thread: CallerID 
returned with error on channel 'Zap/1-1'
    -- Executing Wait("Zap/1-1", "1") in new stack
    -- Executing Dial("Zap/1-1", "SIP/201&SIP/202|70|tm") in new stack
    -- Called 201
    -- Called 202
    -- SIP/201-04fd is ringing
    -- SIP/202-5f9d is ringing
  == Spawn extension (inbound-analog, s, 2) exited non-zero on 'Zap/1-1'
    -- Hungup 'Zap/1-1'



Is there any way to kill this?

Thanks!