[Asterisk-Users] Re: mISDN + chan_misdn.so + winbond issue

[Michel Koenen]

Hi,

This is to let you all know that I have it working now. Thanks to
Titus who supplied his list of a working combination (
http://amatisoft.homelinux.com/demo/index.html ) and some other tips.

For archive and history purposes I will post my combination which may
help others who will run into this:
Packages:
* kernel 2.6.9
* mISDN kernel patch from PBX4Linux
(http://isdn.jolly.de/download/v3.0beta/mISDN_for_PBX4Linux_2005_03_06.tar.gz)
* mISDN user from PBX4Linux
(http://isdn.jolly.de/download/v3.0beta/mISDNuser_for_PBX4Linux_2005_01_28.tar.gz)
* chan_misdn 0.1.0
* asterisk 1.0.7

Important factor was also to have the correct 'layermask' parameter
when loading the winbond module. This had to be 0xf   and not 0x1 , I
am still thankful to Titus who pointed this out, at least I could not
find any documentation on this parameter but it turned out to be an
important one.
My modprobe looks now like this:
modprobe w6692pci protocol=2 layermask=0xf

Best regards,
Michel Koenen


On 6/6/05, Michel Koenen <michel.koenen at gmail.com> wrote:
> Hi all,
> 
> Does anybody of you have the winbond w6692 working with the
> mISDN/chan_misdn.so?
> 
> When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1"
> error. The /var/log/messages file says: "MISDN free_device: entitylist
> not empty"
> 
> I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7
> chan_misdn build from chan_misdn-beta-0.0.3-rc6  and against
> mISDNuser-CVS-2004-08-29.
> 
> The /dev/mISDN node was also created.
> 
> I'm loading the kernel modules this way:
> modprobe zaptel
> modprobe ztdummy
> modprobe mISDN_core
> modprobe mISDN_l1
> modprobe mISDN_l2
> modprobe l3udss1
> modprobe mISDN_dsp
> modprobe w6692pci protocol=2 layermask=1
> 
> Then I start asterisk:
> asterisk -c -vvvvvv -dddddd
> 
> When loading chan_misdn.so , Asterisk complains and exits after the
> last error line below
> " [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri))
> debug_init: using stdout for debug log
> debug_init: using stderr for warning log
> debug_init: using stderr for error log
> debug_init: debug_mask = 0
> No lower Id port:1
> init_stack: No such file or directory "
> 
> Contents of the /var/log/messages for all above commands:
> Jun  5 20:25:20 pbx kernel: Zapata Telephony Interface Registered on major 196
> Jun  5 20:25:25 pbx kernel: Registered tone zone 0 (United States /
> North America)
> Jun  5 20:25:48 pbx kernel: Modular ISDN Stack core $Revision: 1.25 $
> Jun  5 20:25:53 pbx kernel: ISDN L1 driver version 1.11
> Jun  5 20:25:56 pbx kernel: ISDN L2 driver version 1.20
> Jun  5 20:26:02 pbx kernel: mISDN: DSS1 Rev. 1.29
> Jun  5 20:26:07 pbx kernel: mISDN_dsp: Audio DSP  Rev. 1.10 (debug=0x0)
> Jun  5 20:26:20 pbx kernel: Winbond W6692 PCI driver Rev. 1.13
> Jun  5 20:26:21 pbx kernel: PCI: Found IRQ 9 for device 0000:00:0f.0
> Jun  5 20:26:21 pbx kernel: mISDN_w6692: found adapter Winbond W6692
> at 0000:00:0f.0
> Jun  5 20:26:21 pbx kernel: W6692: Winbond W6692 version (0): W6692 V00
> Jun  5 20:26:21 pbx kernel: w6692: IRQ 9 count 4
> Jun  5 20:26:21 pbx kernel: w6692 1 cards installed
> Jun  5 20:26:34 pbx kernel: MISDN free_device: entitylist not empty
> 
> 
> Am I using wrong or incompatible source versions or is this a bug or
> am I doing something wrong?
> 
> Btw the misdn.conf contains:
> [general]
> language=en
> immediate=no
> debug=0
> 
> [mycard]
> context=incoming
> ports=1,2
> msns=72
> 
> Using ports=1 or ports=2 or changing msns gives the same problems..
> When you have a working configuration, I am curious which source
> versions of needed packages you have used.
> 
> Thank you in advance for your response.
> 
> Best regards,
> Michel Koenen
>