[Asterisk-Users] mISDN + chan_misdn.so + winbond issue

[Michel Koenen]

David,

Thank you. For some reason I'm not getting 0.1.0 build on my system,
probably because I miss or have wrong version of header files or -D
flags. I lost some time trying to find the ultimate combination of
needed sources of the different packages but no success. Therefor I am
still curious which combi of packages people use to get the misdn
working.

Best regards,
Michel

On 6/7/05, David Phelan <david at blueridge.com.au> wrote:
> Update to at least chan_misdn-0.1.0 ..
> I am using snapshot from 11.05.05 without too many issues.
> 
> Dave
> 
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michel Koenen
> Sent: Monday, 6 June 2005 6:28 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] mISDN + chan_misdn.so + winbond issue
> 
> Hi all,
> 
> Does anybody of you have the winbond w6692 working with the
> mISDN/chan_misdn.so?
> 
> When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1"
> error. The /var/log/messages file says: "MISDN free_device: entitylist not
> empty"
> 
> I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel
> 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6  and against
> mISDNuser-CVS-2004-08-29.
> 
> The /dev/mISDN node was also created.
> 
> I'm loading the kernel modules this way:
> modprobe zaptel
> modprobe ztdummy
> modprobe mISDN_core
> modprobe mISDN_l1
> modprobe mISDN_l2
> modprobe l3udss1
> modprobe mISDN_dsp
> modprobe w6692pci protocol=2 layermask=1
> 
> Then I start asterisk:
> asterisk -c -vvvvvv -dddddd
> 
> When loading chan_misdn.so , Asterisk complains and exits after the last
> error line below " [chan_misdn.so] => (Channel driver for mISDN Support
> (Bri/Pri))
> debug_init: using stdout for debug log
> debug_init: using stderr for warning log
> debug_init: using stderr for error log
> debug_init: debug_mask = 0
> No lower Id port:1
> init_stack: No such file or directory "
> 
> Contents of the /var/log/messages for all above commands:
> Jun  5 20:25:20 pbx kernel: Zapata Telephony Interface Registered on major
> 196 Jun  5 20:25:25 pbx kernel: Registered tone zone 0 (United States /
> North America) Jun  5 20:25:48 pbx kernel: Modular ISDN Stack core
> $Revision: 1.25 $ Jun  5 20:25:53 pbx kernel: ISDN L1 driver version 1.11
> Jun  5 20:25:56 pbx kernel: ISDN L2 driver version 1.20 Jun  5 20:26:02 pbx
> kernel: mISDN: DSS1 Rev. 1.29 Jun  5 20:26:07 pbx kernel: mISDN_dsp: Audio
> DSP  Rev. 1.10 (debug=0x0) Jun  5 20:26:20 pbx kernel: Winbond W6692 PCI
> driver Rev. 1.13 Jun  5 20:26:21 pbx kernel: PCI: Found IRQ 9 for device
> 0000:00:0f.0 Jun  5 20:26:21 pbx kernel: mISDN_w6692: found adapter Winbond
> W6692 at 0000:00:0f.0 Jun  5 20:26:21 pbx kernel: W6692: Winbond W6692
> version (0): W6692 V00 Jun  5 20:26:21 pbx kernel: w6692: IRQ 9 count 4 Jun
> 5 20:26:21 pbx kernel: w6692 1 cards installed Jun  5 20:26:34 pbx kernel:
> MISDN free_device: entitylist not empty
> 
> 
> Am I using wrong or incompatible source versions or is this a bug or am I
> doing something wrong?
> 
> Btw the misdn.conf contains:
> [general]
> language=en
> immediate=no
> debug=0
> 
> [mycard]
> context=incoming
> ports=1,2
> msns=72
> 
> Using ports=1 or ports=2 or changing msns gives the same problems..
> When you have a working configuration, I am curious which source versions of
> needed packages you have used.
> 
> Thank you in advance for your response.
> 
> Best regards,
> Michel Koenen
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 4/06/2005
> 
> 
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 4/06/2005
> 
> 
>