[Asterisk-Users] how to loop E400P card to test ?Any help will be appreciated.

[dev2002 at 163.com]

asterisk-users
Any help will be appreciated.
 		This card did not connect with E1 line
how to loop  E400P card to test ?
now I loop the card.
span 1 ---span2 
RJ45 pins 
1--4
2--5

but show :
When calling ,showing  error:
 app_dial.c:764 dial_exec: Unable to create channel of type 'Zap'
 
Asterisk Ready.
*CLI>     -- Registered SIP '2002' at 192.168.139.59 port 3289 expires 120
    -- Executing Dial("SIP/2002-a4af", "Zap/1") in new stack
Jul 28 15:51:25 NOTICE[1910]: app_dial.c:764 dial_exec: Unable to create channel of type 'Zap'
  == Everyone is busy/congested at this time
    -- Executing Hangup("SIP/2002-a4af", "") in new stack
  == Spawn extension (default, 2001, 2) exited non-zero on 'SIP/2002-a4af'

--------------------------
   zapata.conf

signalling= pri_cpe
switchtype=national 
pridialplan=unknown

group=1
channel=>1-15
channel=>17-31

group = 2
channel => 32-46
channel => 48-62

group = 3
channel => 63-77
channel => 79-93

group = 4
channel => 94-108
channel => 110-124

------------------------
  zaptel.conf 
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
span=2,1,0,ccs,hdb3,crc4
bchan=32-46
dchan=47
bchan=48-62
span=3,1,0,ccs,hdb3,crc4
bchan=63-77
dchan=78
bchan=79-93
span=4,1,0,ccs,hdb3,crc4
bchan=94-108
dchan=109
bchan=110-124

--------------------------
extensions.conf
[default]
include => from-sip
[from-sip]

exten => 2001,1,Dial(Zap/1);
exten => 2001,2,Hangup

exten =>2002,1,Dial(SIP/2002,30)
exten =>2002,2,Hangup


 
thanks  a lot
:)


        dev2002
        dev2002 at 163.com
          2005-07-28