[Asterisk-Users] T1 - incomplete calls

[jj]

It would be helpful to capture a complete ISDN call setup.

On the cli type "pri debug span 1"

Then place a call and turn off debug with "pri no debug span 1"

You will then have a complete listing of the signalling between your  
co and your * for this time period.

Good Luck


On Jul 22, 2005, at 9:34 AM, JOAO CARLOS MOURA wrote:

>  pri show span 1
> Primary D-channel: 24
> Status: Provisioned, Up, Active
> Switchtype: National ISDN
> Type: CPE
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: 0
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
>
> thks
> ----- Original Message -----
> From: Steve Totaro
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Sent: Thursday, July 21, 2005 11:33 PM
> Subject: Re: [Asterisk-Users] T1 - incomplete calls
>
> pri debug span 1 output?
> ----- Original Message -----
> From: Thomas Christie
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Sent: Thursday, July 21, 2005 4:14 PM
> Subject: RE: [Asterisk-Users] T1 - incomplete calls
>
> Incomplete meaning "never connected" or "connected then  
> disconnected abruptly?"  Are the calls inbound or outbound?  All  
> calls or just some calls?  If just some, about what percentage are  
> problem calls?
>
> Try setting Switchtype = 5ess, 4ess, etc.  Let me know what you  
> notice, if anything is different.
>
> Thomas Christie
>
> There are 10 types of people in the world:  those who understand  
> binary and those who don't.
>
>
>
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk- 
> users-bounces at lists.digium.com] On Behalf Of JOAO CARLOS MOURA
> Sent: Thursday, July 21, 2005 17:56
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] T1 - incomplete calls
>
> Hi All
> Help.....
>
> We are using a T1 with Paetec Telecom in the Miami area, with a  
> Digium card into our Asterisk
> software, and in the last week we are experience a large quantities of
> incomplete calls, even local and international, what do you think,
> the problem are into the T1 or into our configuration?
> Here our configuration
>
>
> Zaptel.conf
> span=1,1,0,esf,b8zs
> bchan=1-23
> dchan=24
>
> defaultzone=us
> loadzone=us
> =======================================
>
> Zapata.conf
> [channels]
> language=en
> signalling=pri_cpe
> switchtype=national
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=200 ; Asterisk trains to the beginning of the call,  
> number is in milliseconds
> callerid=000
> busydetect=yes
> busycount=5
> group=1
> callgroup=1
> pickupgroup=1
> callreturn=yes
> context=pstn
> channel => 1-23
> Thank you
>
> João Carlos Moura
> NiNeTel Telecommunications
> 7382 N.W. 35 Terrace
> Miami, FL 33122 USA
> João Carlos Moura
> NiNeTel Telecommunications
> 7382 N.W. 35 Terrace
> Miami, FL 33122 USA
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users