[Asterisk-Users] T1 - incomplete calls

[JOAO CARLOS MOURA]

 pri show span 1

Primary D-channel: 24
Status: Provisioned, Up, Active
Switchtype: National ISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3


thks
  ----- Original Message ----- 
  From: Steve Totaro 
  To: Asterisk Users Mailing List - Non-Commercial Discussion 
  Sent: Thursday, July 21, 2005 11:33 PM
  Subject: Re: [Asterisk-Users] T1 - incomplete calls


  pri debug span 1 output?
    ----- Original Message ----- 
    From: Thomas Christie 
    To: 'Asterisk Users Mailing List - Non-Commercial Discussion' 
    Sent: Thursday, July 21, 2005 4:14 PM
    Subject: RE: [Asterisk-Users] T1 - incomplete calls


    Incomplete meaning "never connected" or "connected then disconnected abruptly?"  Are the calls inbound or outbound?  All calls or just some calls?  If just some, about what percentage are problem calls?

    Try setting Switchtype = 5ess, 4ess, etc.  Let me know what you notice, if anything is different.

    Thomas Christie

    There are 10 types of people in the world:  those who understand binary and those who don't.





----------------------------------------------------------------------------
    From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of JOAO CARLOS MOURA
    Sent: Thursday, July 21, 2005 17:56
    To: asterisk-users at lists.digium.com
    Subject: [Asterisk-Users] T1 - incomplete calls


    Hi All
    Help.....

    We are using a T1 with Paetec Telecom in the Miami area, with a Digium card into our Asterisk 
    software, and in the last week we are experience a large quantities of 
    incomplete calls, even local and international, what do you think, 
    the problem are into the T1 or into our configuration?
    Here our configuration


    Zaptel.conf
    span=1,1,0,esf,b8zs
    bchan=1-23 
    dchan=24 

    defaultzone=us
    loadzone=us

    =======================================

    Zapata.conf
    [channels]
    language=en
    signalling=pri_cpe
    switchtype=national
    echocancel=yes
    echocancelwhenbridged=yes
    echotraining=200 ; Asterisk trains to the beginning of the call, number is in milliseconds
    callerid=000
    busydetect=yes
    busycount=5
    group=1
    callgroup=1
    pickupgroup=1
    callreturn=yes
    context=pstn
    channel => 1-23

    Thank you

    João Carlos Moura
    NiNeTel Telecommunications
    7382 N.W. 35 Terrace
    Miami, FL 33122 USA
    João Carlos Moura
    NiNeTel Telecommunications
    7382 N.W. 35 Terrace
    Miami, FL 33122 USA


----------------------------------------------------------------------------


    _______________________________________________
    Asterisk-Users mailing list
    Asterisk-Users at lists.digium.com
    http://lists.digium.com/mailman/listinfo/asterisk-users
    To UNSUBSCRIBE or update options visit:
       http://lists.digium.com/mailman/listinfo/asterisk-users


------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050722/2debced3/attachment.htm