[Asterisk-Users] Asterisk as Gateway

[Armin Schindler]

On Mon, 11 Jul 2005, Joao Pereira wrote:
> Hello to all
> I succefully installed Asterisk and an Eicon Diva Server 4 BRI (with CAPI) to
> connect to a Siemens PBX, but I still cant forward calls to the Siemens PBX
> (neither receive them from the PBX).
> Here s the result in the asterisk console when I try to dial the 116 PBX
> phone:
> 
> 
>    -- Executing Dial("SIP/193.136.2.205:5060-fd1f", "CAPI/12345678:b116|90")
> in new stack
> -- data = 12345678:b116
> -- capi request omsn = 12345678
> == found capi with omsn = 12345678
> == CAPI Call CAPI[contr1/12345678]/11 with B3    -- Called 12345678:b116
>  -- CONNECT_CONF ID=001 #0x0012 LEN=0014
> Controller/PLCI/NCCI            = 0x301
> Info                            = 0x0
> 
>  -- CONNECT_CONF ID=001 #0x0012 LEN=0014
> Controller/PLCI/NCCI            = 0x301
> Info                            = 0x0
> 
> == received CONNECT_CONF PLCI = 0x301 INFO = 0
>  -- DISCONNECT_IND ID=001 #0x001b LEN=0014
> Controller/PLCI/NCCI            = 0x301
> Reason                          = 0x3302
> 
> == DISCONNECT_IND PLCI=0x301 REASON=0x3302
>  -- CAPI Hangingup
> == No one is available to answer at this time
> 
> Does someone have an ideia of what is missing?
> The Siemens PBX should forward the call to its 116 extension... but there's no
> way I can debug it...

I assume you use chan_capi-0.3.5 !? 

Some messages are missing in the debug, please try chan_capi-0.5.3 from 
sourceforge. (But note, the capi.conf and dial syntax has changed in that 
version).

Armin