[Asterisk-Users] adit 600 fxo ports immediately "answers" outgoing calls (even if not connected to line)

[Steven Critchfield]

On Fri, 2005-01-28 at 11:35 -0600, Jon Gabrielson wrote:
> I have an adit 600 with an fxo card connected to a digium T1 card.
> If I try to make an outgoing call and the T1 cable is disconnected,
> asterisks returns congested like it should.
> But, if the adit 600 is connected to the T1 card, the adit 600 
> immediately "answers" the call even if there are no physical
> lines attached.  I even removed the fxo card and the adit
> 600 still "answers" the outgoing call even though it obviously
> has no way to actually route the call.
> 
> How do I tell asterisk and/or the adit 600 to make sure it has
> a dialtone before it answers the call and tries to route it?

Trouble with analog lines. What type of signal do you think the ADIT
should send when it doesn't have a loop? 
-- 
Steven Critchfield <critch at basesys.com>