[Asterisk-Users] Am I missing something really
basichere?????helpwith Asterisk@home {Scanned} {Scanned} {Scanned}
David Shaw
asterisk at ke6upi.com
Fri Jan 28 07:14:42 MST 2005
Remember I'm new here too.
You might need to edit /etc/zaptel.conf
Check fxsks=1-4 I have four X100P cards.
If you have one X100P change it to fxsks=1
I have no idea what AMP configurator is?????
David
On Thu, 2005-01-27 at 12:17 -0500, Jeff R Glassman wrote:
> I also edited the Zapata.conf file I did not change the zaptel.conf, what did you change in it
>
> Jeff
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of David Shaw
> Sent: Thursday, January 27, 2005 11:57 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] Am I missing something really
> basichere?????helpwith Asterisk at home {Scanned} {Scanned}
>
>
> I'm running Asterisk at Home. I had to edit /etc/zaptel.conf
> and /etc/asterisk/zapata.conf. After that it works great.
>
> David..
>
>
> On Thu, 2005-01-27 at 09:54 -0500, dean collins wrote:
> > Ok, I thought the point of asterisk at home was that it automatically
> > detected the X100P board and configured it correctly.
> >
> >
> >
> > Is this incorrect? You still need to modify /etc/zaptel files? And not
> > just using the AMP configurator.
> >
> >
> >
> > There is no mention of this on the Asterisk at home webpage.
> >
> >
> >
> > Can anyone who has actually used ast6erisk at home confirm this one way
> > or the other?
> >
> >
> >
> >
> >
> > Thanks,
> >
> > Dean
> >
> >
> >
> >
> >
> >
> >
> >
> > ______________________________________________________________________
> >
> > From:asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> > bounces at lists.digium.com] On Behalf Of David Shaw
> > Sent: Thursday, January 27, 2005 9:28 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] Am I missing something really basic
> > here?????helpwith Asterisk at home {Scanned}
> >
> >
> >
> >
> > Yes, You need to add channels to your zapata.conf file.
> >
> >
> >
> >
> >
> > zapata.conf
> >
> >
> > [channels]
> > ;
> > ; X100P plugged into PSTN
> > ; X100P # 1
> > ;[line1]
> > context=line1
> > signalling=fxs_ks
> > echocancel=yes
> > echocancelwhenbridged=yes
> > relaxdtmf=yes
> > rxgain=1.5
> > txgain=1.5
> > immediate=no
> > busydetect=no
> > callprogress=no
> > musiconhold=default
> > usecallerid=yes
> > callerid=asreceived
> > channel => 1
> >
> >
> >
> >
> >
> > You might need to edit /etc/zaptel.conf
> >
> >
> > Check fxsks=1-4 I have four X100P cards.
> >
> >
> > If you have one change it to fxsks=1
> >
> >
> >
> >
> >
> > extensions.conf
> >
> >
> >
> >
> >
> > [general]
> > static=yes
> > writeprotect=no
> >
> >
> >
> >
> >
> > [globals]
> > CONSOLE=Console/dsp ; Console interface
> > for demo
> > IAXINFO=guest ; IAXtel
> > username/password
> > TRUNKL1=Zap/1
> > TRUNKL2=Zap/2
> > TRUNKL3=Zap/3
> > TRUNKL4=Zap/4 ; Trunk interface
> > TRUNKMSD=1 ; MSD digits to strip
> > (usually 1 or 0)
> >
> >
> >
> >
> >
> > [line1]
> > exten => s,1,Dial(SIP/101,20)
> > exten => s,2,Answer
> > exten => s,3,Wait,1
> > exten => s,4,Voicemail,101
> > exten => s,5,Hangup
> >
> >
> >
> >
> >
> > Here I have TRUNKL1=Zap/? for each X100P cards.
> >
> >
> >
> >
> >
> > [line1] tells asterisk how to answer that line.
> >
> >
> >
> >
> >
> > Remember I'm very new at this, but I didn't see anyone respond to your
> > post.
> >
> >
> >
> >
> >
> > Goog luck, David
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ----- Original Message -----
> >
> >
> > From: dean collins
> >
> >
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> >
> >
> > Sent: Wednesday, January 26, 2005 5:36 AM
> >
> >
> > Subject: [Asterisk-Users] Am I missing something really basic
> > here????? helpwith Asterisk at home {Scanned}
> >
> >
> >
> >
> >
> > I’m trying to install asterisk at home, I’ve just downloaded the
> > latest cd from soundforge. I can get it to install ok (network
> > card didn’t auto configure – but I worked out how to use
> > ‘netconfig’).
> >
> >
> >
> > I worked out how to add a few grandstream budgetone fine.
> > Worked out how to upload music etc. Worked out how to modify
> > FOP.
> >
> >
> >
> > Voicemail and meetme’s work fine.
> >
> >
> >
> > HOWEVER….
> >
> >
> >
> > I’m using a X100p. I cant get it to make a call out or use the
> > default extension for an incoming line.
> >
> >
> >
> > What do I need to make the pstn connection work? Do I need to
> > modify Zapata.conf? there are zero instructions on the
> > asterisk at home page as to what to do.
> >
> >
> >
> > Can anyone help me out here.
> >
> >
> >
> >
> >
> > TIA,
> >
> > Dean
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> > MailScanner thanks transtec Computers for their support.
> > Plase contact support at computer-medic.us if you have questions
> > about this email.
> >
> >
> > ______________________________________________________________
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by KE6UPI, and is
> > believed to be clean.
> > MailScanner thanks transtec Computers for their support.
> > Plase contact Support at KE6UPI if you have questions about this
> > email.
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> > MailScanner thanks transtec Computers for their support.
> > Plase contact support at computer-medic.us if you have questions about
> > this email.
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> --
> David Shaw <asterisk at ke6upi.com>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
David Shaw <asterisk at ke6upi.com>
More information about the asterisk-users
mailing list