[Asterisk-Users] Am I missing something really
basichere?????helpwith Asterisk@home {Scanned} {Scanned}
Jeff R Glassman
jrglass at columbus.rr.com
Thu Jan 27 10:17:17 MST 2005
I also edited the Zapata.conf file I did not change the zaptel.conf, what did you change in it
Jeff
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of David Shaw
Sent: Thursday, January 27, 2005 11:57 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Am I missing something really
basichere?????helpwith Asterisk at home {Scanned} {Scanned}
I'm running Asterisk at Home. I had to edit /etc/zaptel.conf
and /etc/asterisk/zapata.conf. After that it works great.
David..
On Thu, 2005-01-27 at 09:54 -0500, dean collins wrote:
> Ok, I thought the point of asterisk at home was that it automatically
> detected the X100P board and configured it correctly.
>
>
>
> Is this incorrect? You still need to modify /etc/zaptel files? And not
> just using the AMP configurator.
>
>
>
> There is no mention of this on the Asterisk at home webpage.
>
>
>
> Can anyone who has actually used ast6erisk at home confirm this one way
> or the other?
>
>
>
>
>
> Thanks,
>
> Dean
>
>
>
>
>
>
>
>
> ______________________________________________________________________
>
> From:asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of David Shaw
> Sent: Thursday, January 27, 2005 9:28 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Am I missing something really basic
> here?????helpwith Asterisk at home {Scanned}
>
>
>
>
> Yes, You need to add channels to your zapata.conf file.
>
>
>
>
>
> zapata.conf
>
>
> [channels]
> ;
> ; X100P plugged into PSTN
> ; X100P # 1
> ;[line1]
> context=line1
> signalling=fxs_ks
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=1.5
> txgain=1.5
> immediate=no
> busydetect=no
> callprogress=no
> musiconhold=default
> usecallerid=yes
> callerid=asreceived
> channel => 1
>
>
>
>
>
> You might need to edit /etc/zaptel.conf
>
>
> Check fxsks=1-4 I have four X100P cards.
>
>
> If you have one change it to fxsks=1
>
>
>
>
>
> extensions.conf
>
>
>
>
>
> [general]
> static=yes
> writeprotect=no
>
>
>
>
>
> [globals]
> CONSOLE=Console/dsp ; Console interface
> for demo
> IAXINFO=guest ; IAXtel
> username/password
> TRUNKL1=Zap/1
> TRUNKL2=Zap/2
> TRUNKL3=Zap/3
> TRUNKL4=Zap/4 ; Trunk interface
> TRUNKMSD=1 ; MSD digits to strip
> (usually 1 or 0)
>
>
>
>
>
> [line1]
> exten => s,1,Dial(SIP/101,20)
> exten => s,2,Answer
> exten => s,3,Wait,1
> exten => s,4,Voicemail,101
> exten => s,5,Hangup
>
>
>
>
>
> Here I have TRUNKL1=Zap/? for each X100P cards.
>
>
>
>
>
> [line1] tells asterisk how to answer that line.
>
>
>
>
>
> Remember I'm very new at this, but I didn't see anyone respond to your
> post.
>
>
>
>
>
> Goog luck, David
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ----- Original Message -----
>
>
> From: dean collins
>
>
> To: Asterisk Users Mailing List - Non-Commercial Discussion
>
>
> Sent: Wednesday, January 26, 2005 5:36 AM
>
>
> Subject: [Asterisk-Users] Am I missing something really basic
> here????? helpwith Asterisk at home {Scanned}
>
>
>
>
>
> I’m trying to install asterisk at home, I’ve just downloaded the
> latest cd from soundforge. I can get it to install ok (network
> card didn’t auto configure – but I worked out how to use
> ‘netconfig’).
>
>
>
> I worked out how to add a few grandstream budgetone fine.
> Worked out how to upload music etc. Worked out how to modify
> FOP.
>
>
>
> Voicemail and meetme’s work fine.
>
>
>
> HOWEVER….
>
>
>
> I’m using a X100p. I cant get it to make a call out or use the
> default extension for an incoming line.
>
>
>
> What do I need to make the pstn connection work? Do I need to
> modify Zapata.conf? there are zero instructions on the
> asterisk at home page as to what to do.
>
>
>
> Can anyone help me out here.
>
>
>
>
>
> TIA,
>
> Dean
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> MailScanner thanks transtec Computers for their support.
> Plase contact support at computer-medic.us if you have questions
> about this email.
>
>
> ______________________________________________________________
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> This message has been scanned for viruses and
> dangerous content by KE6UPI, and is
> believed to be clean.
> MailScanner thanks transtec Computers for their support.
> Plase contact Support at KE6UPI if you have questions about this
> email.
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> MailScanner thanks transtec Computers for their support.
> Plase contact support at computer-medic.us if you have questions about
> this email.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
David Shaw <asterisk at ke6upi.com>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list