[Asterisk-Users] R2 in Bolivia

Thu Jan 27 07:08:13 MST 2005



These are log of incoming calls

Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 MFC/R2 call control(1)
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 MFC/R2 make call
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Making a new call with CRN 32769
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx bits 0x1   [1/       1/  0/  0]
    -- Called g3/70513933
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event Dialing - 0x9841460
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Rx bits 0xD   [1/      40/201/  0]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx tone 7 on  [2/      40/202/  0]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Rx tone 5 on  [2/      40/202/201]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx tone 7 off [2/      40/202/201]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Rx tone 5 off [2/      40/202/201]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx tone E on  [2/      40/202/201]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Rx tone 5 on  [2/      40/202/207]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:50 mfcr2 Tx tone E off [2/      40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Rx tone 5 off [2/      40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Tx tone E on  [2/      40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Rx tone 4 on  [2/      40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Tx tone E off [2/      40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Rx tone 4 off [2/      40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Far end disconnected - state 0x40
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event Far end disconnected - 0x9841460
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:3181 handle_uc_event: CRN 32769 - far disconnect cause 42
    -- Channel 0 got hangup
    -- UniCall/1-1 is circuit-busy
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 MFC/R2 call control(6)
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 MFC/R2 drop call(cause=16)
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Clearing fwd
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Tx bits 0x9   [2/     800/209/207]
    -- Hungup 'UniCall/1-1'
  == Everyone is busy/congested at this time
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Rx bits 0x9   [1/     800/211/  0]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Call disconnected - state 0x800
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event Drop call - 0x9841460
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 MFC/R2 call control(7)
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 MFC/R2 release call
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 2005/01/26 22:17:51 mfcr2 Destroying call with CRN 32769
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event Release call - 0x9841460
    -- UC channel 1 released
    -- H.323 call 'ip$200.87.125.195:30008/25331' cleared, reason 7 (Remote user stopped calling)


On Wed, 2005-01-26 at 07:53 +0800, Steve Underwood wrote:

> Hi Jorge,
> 
> You might be the first person to try the Bolivian variant. I need more 
> information to make any sense of the problem. In 
> /etc/asterisk/unicall.conf add the line:
> 
> loglevel = 1023
> 
> and try again. You should get a much more detailed log of what happens. 
> Send that to me.
> 
> Regards,
> Steve
> 
> jorge at redcetus.com wrote:
> 
> >Hi
> >I made some tests with new MFC/R2 an unicall support for asterisk
> >and now have dialing out problem using UniCall / R2.
> >This is the error report in cli>
> >
> >     UC channel 30 protocol error. Cause 32772
> >
> >
> >I hope this helps.
> >
> >Thanks in advance,
> >
> >Jorge
> >
> >
> >PD: de conf files
> >zaptel.conf
> >
> >   span=1,1,1,cas,hdb3
> >   cas=1-15:1010
> >   cas=17-31:1010protocolclass=mfcr2
> >
> >unicall.conf
> >
> >protocolvariant=bo,20,4
> >protocolend=cpe
> >group = 3
> >channel => 1-15
> >;skip time slot 16
> >channel=17-31
> >  
> >