[Asterisk-Users] TDM400P Dell 1850 Server

[Adam Robins]

The TE410P is a T1/E1 card.  I need the card for POTS lines.  Is there
also a TDM410P that does not appear on the Digium web site? 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kristian
Kielhofner
Sent: Tuesday, January 25, 2005 1:18 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TDM400P Dell 1850 Server

Adam Robins wrote:

> I am looking at running Asterisk on a Dell PowerEdge 1850 server. 
>  
> My choices for expansion slots are:
>  
> BulletPCI-X riser with 1 x 64-bit/133MHz and 1 x 64-bit/100MHz
> 
> BulletPCI Express riser with 2 PCI Express slots, one x4 lane and one 
> x8 lane
>  
> Will a Digium TDM400P work in either of these?
>  
> Thanks,
> Adam
> 

PCI-X.  Make sure to get the 410p.

--
Kristian Kielhofner
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any.