[Asterisk-Users] Cisco ATA186 and Asterisk dialplan

[Dan]

Hi Florian,

----- Original Message ----- 
From: "Florian Overkamp" <florian at obsimref.com>
> On Sat, 2005-01-22 at 11:46 +0200, Dan wrote:
>> I have a Cisco ATA186 connected to an Asterisk Server (SIP)
>> The dialplan uses 1XX for local extensions and XXXXXXX for
>> external numbers, where the first digit is always different than 1.
>> In this moment, when I dial 123 for example, ATA waits till
>> timeout before dialing that number. The same for the longer one.
>> How can I do to make it dial imediately when 3 digits starting with
>> 1 are received?
>
>
> You need to modify the DialPlan parameter to do that. Info on how to
> configure it is in the firmware package. Would probably contain the
> string '1..|[02_9]......' or something like that (untested). It is
> parsed from left to right so if you start the string with those keys
> matching your pattern those should take preference over everything else.
>

Thanks a lot.
I have found the full specification here:
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00801e0eb0.html#wp1127271

Thank you and best regards,
Dan