[Asterisk-Users] Asterisk - libunicall - MFCr2 *** settings problems***

[Guillermo Freige]

Kaws:
Are you using unicall-0.0.1d or earlier?
If yes, please switch to 0.0.2pre4 (or pre3 if you have sound problems with 
pre4) and test again. 0.0.1 versions had a lot of problems, mostly in 
outgoing calls

Guillermo

>From: kaws elchamal <kawselchamal at yahoo.com>
>Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion 
><asterisk-users at lists.digium.com>
>To: asterisk-dev at lists.digium.com, asterisk-users at lists.digium.com
>Subject: [Asterisk-Users] Asterisk - libunicall - MFCr2 *** settings 
>problems***
>Date: Thu, 20 Jan 2005 02:37:38 -0800 (PST)
>MIME-Version: 1.0
>Received: from lists.digium.com ([69.16.138.164]) by mc5-f33.hotmail.com 
>with Microsoft SMTPSVC(6.0.3790.211); Thu, 20 Jan 2005 02:49:11 -0800
>Received: from [69.16.138.164] (localhost [127.0.0.1])by lists.digium.com 
>(Postfix) with ESMTPid 3024D2FEDAB; Thu, 20 Jan 2005 04:37:49 -0600 (CST)
>Received: from psmtp.com (exprod5mx124.postini.com [64.18.0.38])by 
>lists.digium.com (Postfix) with SMTP id B91AD2FC342for 
><asterisk-users at lists.digium.com>;Thu, 20 Jan 2005 04:37:30 -0600 (CST)
>Received: from source ([66.218.93.197]) by 
>exprod5mx124.postini.com([64.18.4.10]) with SMTP; Thu, 20 Jan 2005 04:37:38 
>CST
>Received: (qmail 66919 invoked by uid 60001); 20 Jan 2005 10:37:38 -0000
>Received: from [82.101.157.10] by web42104.mail.yahoo.com via HTTP;Thu, 20 
>Jan 2005 02:37:38 PST
>X-Message-Info: 820stLNiepS16Rm4VQXrmlJV/GNqC7nB3m+8dRPKmTA=
>X-Original-To: asterisk-users at lists.digium.com
>Delivered-To: asterisk-users at lists.digium.com
>Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys
>DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; 
>d=yahoo.com;b=3ykjJ3afigUOYwBsx96OOddfq2B6XuphFSm22oYD3lR4o7p4zCD3RR+t5VcLcABRHa4WxOZtnpSrvTv6eSan9OXFOuCOpVDCETawEQwvg7KusVjRxQ+mTrD0vxSH9tlDiN5FK2YZLLe8MregamaHyuQOjKa29PTNqXZ84kzJlU0=; 
>X-pstn-levels: (S:49.76371/99.90000 )
>X-pstn-settings: 1 (0.1500:0.1500) gt3 gt2 gt1 X-pstn-addresses: from 
><kawselchamal at yahoo.com> [65/3] X-BeenThere: 
>asterisk-users at lists.digium.com
>X-Mailman-Version: 2.1.5
>Precedence: list
>List-Id: Asterisk Users Mailing List - Non-Commercial 
>Discussion<asterisk-users.lists.digium.com>
>List-Unsubscribe: 
><http://lists.digium.com/mailman/listinfo/asterisk-users>,<mailto:asterisk-users-request at lists.digium.com?subject=unsubscribe>
>List-Archive: <http://lists.digium.com/pipermail/asterisk-users>
>List-Post: <mailto:asterisk-users at lists.digium.com>
>List-Help: <mailto:asterisk-users-request at lists.digium.com?subject=help>
>List-Subscribe: 
><http://lists.digium.com/mailman/listinfo/asterisk-users>,<mailto:asterisk-users-request at lists.digium.com?subject=subscribe>
>Errors-To: asterisk-users-bounces at lists.digium.com
>Return-Path: asterisk-users-bounces at lists.digium.com
>X-OriginalArrivalTime: 20 Jan 2005 10:49:12.0659 (UTC) 
>FILETIME=[AD93D230:01C4FEDD]
>
>Dear Steve and *.* e1r2 developers and users,
>
>now MFCR2 is successfully installed! many thanks for
>your help.
>
>I'm living in Argelia. I have configure my MFCR2
>according argentina R2 settigs. (look at the end of
>the message)
>
>the testcall run perfectly (only warnings and I think
>that is just debug).
>but I have many problems and when I run
>Asterisk-MFCR2, generally in the begging no errors
>occures. after random time many inopportune errors
>occures:
>sound-cuts, dumb intervals, drop calls and
>disconnections!!!
>
>I think that R2 settings I use are not adapted to
>Argelian R2 settings. I will try change them but I
>have not idea where I must do changes. Please help me.
>
>Regards,
>
>kaws
>
>
>P.S: in the following: my configuration - Argelian R2
>parameters and an example of error.
>
>***********************
>my configuration  is :
>
>
>unical.conf:
>
>protocolclass=mfcr2
>protocolvariant=ar,20,4
>protocolend=cpe
>span=1,1,0,cas,hdb3
>cas=1-15:1101
>cas=17-31:1101
>loadzone=us
>defaultzone=us
>
>zaptel.conf:
>
>span=1,1,0,cas,hdb3
>cas=1-15:1101
>cas=17-31:1101
>
>
>*****************************************************
>the R2 setting of argelia according to quintum are :
>
>CD-Bits ::::::::::::::::::::::: 0001
>Invert-Bits ::::::::::::::::::: 0000
>DNIS Length ::::::::::::::::::: 9 digits *
>Answer Tone ::::::::::::::::::: A-6
>Send 1st Digit :::::::::::::::: 1
>Group B Xmt Idle Tone ::::::::: B-6
>Group B Xmt Busy Tone ::::::::: B-3
>Group B Rcv Idle Tones :::::::: B-2 & B-3
>Group B Rcv Busy Tones :::::::: B-1 & B-2
>ANI Request ::::::::::::::::::: Do not request ANI
>ANI Length
>ANI Category Request
>Tone ANI Tone Request
>ANI Category :::::::::::::::::: I-1
>ANI Calling Party Category :::: II-1
>Seizure Ack Timeout ::::::::::: 150ms
>Release Guard Timeout ::::::::: 600ms
>* Always double-check the DNIS length with your
>carrier
>
>***************************************************
>example of inopportune disconnection:
>
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2 Rx
>bits 0x9   [1/      20/103/107]
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2 Far
>end disconnected - state 0x20
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:2548 handle_uc_event: UC event Far end
>disconnected
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:2854 handle_uc_event: Far disconnect
>cause 16
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:1088 unicall_hangup:
>unicall_hangup(UniCall/5-1)
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:1263 unicall_hangup: Causes 0 16
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2
>mfcr2_DropCall()
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2 Call
>disconnected - state 0x800
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:2548 handle_uc_event: UC event Drop
>call
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:2892 handle_uc_event: Doing a
>uc_ReleaseCall
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2
>mfcr2_ReleaseCall()
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2 Tx
>bits 0x9   [1/    1000/106/107]
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2
>Destroying call with CRN 32769
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2
>release_guard_expired
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:2548 handle_uc_event: UC event Release
>call
>
>
>
>__________________________________
>Do you Yahoo!?
>Yahoo! Mail - Helps protect you from nasty viruses.
>http://promotions.yahoo.com/new_mail
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_________________________________________________________________
Las mejores tiendas, los precios mas bajos, entregas en todo el mundo, 
YupiMSN Compras: http://latam.msn.com/compras/