[Asterisk-Users] SCCP questions

[Remco Barende]

I am writing a howto for the Kirk IP600 and Asterisk, it's almost 
finished, i will publish it soon.

Remco


On Thu, 13 Jan 2005, Niksa Baldun wrote:

> Hello,
>
> I am a Kirk IP600 user too, and I had partial success in getting it to
> work with chan_sccp. I changed the line 133 in chan_sccp.c to the following:
>
> if ( (!s->device) && (mid != RegisterMessage && mid != AlarmMessage &&
> mid != KeepAliveMessage && mid != IpPortMessage)) {
>
> And then I was able to register IP600 hansets, but only to find there
> are other problems. I am currently communicating with Kirk support in
> order to see what is happening. When I have more info I will send it to you.
>
> Niksa
>
>
> Julien Goodwin wrote:
>
>> On Thu, Jan 13, 2005 at 01:09:54PM +0200, Kelemen Zoltan arranged a set of bits into the following:
>>
>>
>>> Hi!
>>>
>>> I have two, not too related questions:
>>> - the probably simpler one: if anyone can help me out using a Cisco
>>> 7905G with chan_sccp? I did already managed to get it working with a SIP
>>> image, I'd just like to see it work with this one as well. It's probably
>>> something I screw up with the configuration, as the phone registers,
>>> only I don't get any lines with it, although I have it configured it to
>>> auto-login.
>>>
>>> excerpt from my sccp.conf
>>> -----snip------
>>>
>>> [SEP001193C2ABFC]
>>> device=SEP001193C2ABFC
>>> type=7905
>>> autologin= c7905
>>> callerid="cisco 7905"
>>>
>>> [c7905]
>>> line = 1045
>>>
>>> -----snip------
>>> (I have a default extension set for the entire sccp.conf, so that
>>> shouldnt(?) be the issue)
>>>
>>>
>>
>> That's the contents of a skinny config file, the two have different
>> formats. Here's what I use for one of my phones:
>> ---snip---
>> [SEP003080628DD7]
>> type        = 12
>> autologin   = phone4
>> description = Cisco Phone 4
>>
>> [phone4]
>> id          = 4005
>> pin         = 1237
>> label       = Phone4
>> description = Phone4
>> callwaiting = 0
>> mailbox     = 4005
>> cid_num     = 4005
>> cid_name    = Cisco Phone 4
>> --- endsnip ---
>> And I call with Dial(SCCP/phone4)
>>
>>
>>> I have the XMLDefaultConf in place, tftp server running, although that's
>>> about it. I would appreciate any pointers in this general direction.
>>> What am I missing? :)
>>>
>>>
>> See above, copy the format, just use your own data.
>>
>>
>>
>>> The second, much more thorny question is: did anyone had any success on
>>> using a KIRK IP600 with asterisk?
>>> - The only thing I really found on the net were a couple of emails on
>>> this list, that didn't get me too far.
>>> The KIRK IP600 is a DECT (cordless) to IP solution, with support for
>>> SCCP and H323. The SCCP interface was designed specifically to be
>>> interoperable with Cisco Call Manager, and it emulates a 7940 for each
>>> of the phones it has registered.
>>>
>>> With chan_skinny I managed to register the phones, they've got tone, but
>>> they would not ring out.
>>> With chan_sccp I had no luck at all, I'm getting the following messages
>>> on the CLI:
>>> ==  >> Got message AlarmMessage
>>> ==  >> Got message RegisterMessage
>>> == Sending Packet Type RegisterRejectMessage (37 bytes)
>>>
>>> Note: the two modules were NOT tried at once.
>>>
>>> So far I didn't have time to check it out with h323, but If anyone had
>>> it working that way, I'm interested in that one as well.
>>>
>>>
>>
>> H323 is probably the one to try, but fix your sccp config like the above
>> (a compile fix for asterisk CVS has just been committed) and let me know
>> what you get (in debug mode very verbose). If anyone in Australia has one
>> or is able to arrange a loan for a few days I'd probably be able to make
>> them work, but without being able to hack on the code with the device it
>> makes it quite hard.
>>
>> I'm just writing some code to see if I can fix the "client sent
>> IPPortMessage without first registering" that someone got before, if
>> anyone is able to duplicate that drop me a line and I'll see if my patch
>> works against it.
>>
>> Thanks,
>> Julien Goodwin
>> chan_sccp developer
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>