[Asterisk-Users] SCCP questions

[Kelemen Zoltan]

Hi!

Both of your answers helped to some extent thank you. The rest remains up to me
to play a bit with the configurations.

thanks,
Zoltan

Quoting Niksa Baldun <niksa.baldun at lumiss.hr>:

> Hello,
>
> I am a Kirk IP600 user too, and I had partial success in getting it to
> work with chan_sccp. I changed the line 133 in chan_sccp.c to the following:
>
> if ( (!s->device) && (mid != RegisterMessage && mid != AlarmMessage &&
> mid != KeepAliveMessage && mid != IpPortMessage)) {
>
> And then I was able to register IP600 hansets, but only to find there
> are other problems. I am currently communicating with Kirk support in
> order to see what is happening. When I have more info I will send it to you.
>
> Niksa
>
>
> Julien Goodwin wrote:
>
> >On Thu, Jan 13, 2005 at 01:09:54PM +0200, Kelemen Zoltan arranged a set of
> bits into the following:
> >
> >
> >>Hi!
> >>
> >>I have two, not too related questions:
> >>- the probably simpler one: if anyone can help me out using a Cisco
> >>7905G with chan_sccp? I did already managed to get it working with a SIP
> >>image, I'd just like to see it work with this one as well. It's probably
> >>something I screw up with the configuration, as the phone registers,
> >>only I don't get any lines with it, although I have it configured it to
> >>auto-login.
> >>
> >>excerpt from my sccp.conf
> >>-----snip------
> >>
> >>[SEP001193C2ABFC]
> >>device=SEP001193C2ABFC
> >>type=7905
> >>autologin= c7905
> >>callerid="cisco 7905"
> >>
> >>[c7905]
> >>line = 1045
> >>
> >>-----snip------
> >>(I have a default extension set for the entire sccp.conf, so that
> >>shouldnt(?) be the issue)
> >>
> >>
> >
> >That's the contents of a skinny config file, the two have different
> >formats. Here's what I use for one of my phones:
> >---snip---
> >[SEP003080628DD7]
> >type        = 12
> >autologin   = phone4
> >description = Cisco Phone 4
> >
> >[phone4]
> >id          = 4005
> >pin         = 1237
> >label       = Phone4
> >description = Phone4
> >callwaiting = 0
> >mailbox     = 4005
> >cid_num     = 4005
> >cid_name    = Cisco Phone 4
> >--- endsnip ---
> >And I call with Dial(SCCP/phone4)
> >
> >
> >>I have the XMLDefaultConf in place, tftp server running, although that's
> >>about it. I would appreciate any pointers in this general direction.
> >>What am I missing? :)
> >>
> >>
> >See above, copy the format, just use your own data.
> >
> >
> >
> >>The second, much more thorny question is: did anyone had any success on
> >>using a KIRK IP600 with asterisk?
> >>- The only thing I really found on the net were a couple of emails on
> >>this list, that didn't get me too far.
> >>The KIRK IP600 is a DECT (cordless) to IP solution, with support for
> >>SCCP and H323. The SCCP interface was designed specifically to be
> >>interoperable with Cisco Call Manager, and it emulates a 7940 for each
> >>of the phones it has registered.
> >>
> >>With chan_skinny I managed to register the phones, they've got tone, but
> >>they would not ring out.
> >>With chan_sccp I had no luck at all, I'm getting the following messages
> >>on the CLI:
> >>==  >> Got message AlarmMessage
> >>==  >> Got message RegisterMessage
> >>== Sending Packet Type RegisterRejectMessage (37 bytes)
> >>
> >>Note: the two modules were NOT tried at once.
> >>
> >>So far I didn't have time to check it out with h323, but If anyone had
> >>it working that way, I'm interested in that one as well.
> >>
> >>
> >
> >H323 is probably the one to try, but fix your sccp config like the above
> >(a compile fix for asterisk CVS has just been committed) and let me know
> >what you get (in debug mode very verbose). If anyone in Australia has one
> >or is able to arrange a loan for a few days I'd probably be able to make
> >them work, but without being able to hack on the code with the device it
> >makes it quite hard.
> >
> >I'm just writing some code to see if I can fix the "client sent
> >IPPortMessage without first registering" that someone got before, if
> >anyone is able to duplicate that drop me a line and I'll see if my patch
> >works against it.
> >
> >Thanks,
> >Julien Goodwin
> >chan_sccp developer
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>