[Asterisk-Users] TDM4000P with 4 FXO's not picking up ringing lines

[John Middleton]

Yeah, it is set to the right signalling..


On Thu, 6 Jan 2005 22:47:45 +0000 (GMT), Chris Glover
<chris at glovercc.clara.co.uk> wrote:
> On Thu, 6 Jan 2005, John Middleton wrote:
> 
> > Ive just installed a TDM4000P with 4 fxos. The zaptel config is fine,
> > zttest comes back with configured. If i call a line when zttest it
> > shows on the display,and then goes when the line drops.
> >
> > In * when a call comes in, it follows my dialplan and answers the call
> > according to the log, but IT DOESN'T actually pick up the call, i.e.
> > it continues ringing.
> >
> > I'm using KS signalling, and connected to the UK phone system.
> >
> > Anyone seen this before, or give me some pointers, or suggest what I
> > should post for diagnostic purposes?
> >
> 
> For the FXO ports on the card, you need to use FXS signalling. FXS_KS in
> your case. Confused? you should be :-)
> 
> HTH
> 
> Chris
> 
> --
> Chris
> ----------------------------------
> E Mail: chris at glovercc.clara.co.uk
> SIP: 84411389 at voiptalk.org
> IAXTEL: 17003366726
>