[Asterisk-Users] TDM4000P with 4 FXO's not picking up ringing lines

[Chris Glover]

On Thu, 6 Jan 2005, John Middleton wrote:

> Ive just installed a TDM4000P with 4 fxos. The zaptel config is fine,
> zttest comes back with configured. If i call a line when zttest it
> shows on the display,and then goes when the line drops.
>
> In * when a call comes in, it follows my dialplan and answers the call
> according to the log, but IT DOESN'T actually pick up the call, i.e.
> it continues ringing.
>
> I'm using KS signalling, and connected to the UK phone system.
>
> Anyone seen this before, or give me some pointers, or suggest what I
> should post for diagnostic purposes?
>

For the FXO ports on the card, you need to use FXS signalling. FXS_KS in 
your case. Confused? you should be :-)

HTH

Chris

-- 
Chris
----------------------------------
E Mail:	chris at glovercc.clara.co.uk
SIP: 84411389 at voiptalk.org
IAXTEL: 17003366726