RES: [Asterisk-Users] chan_oh323 & gatekeeper

[Humberto Aicardi]

You're right it works, but how about receiving calls, how can you register
so the FXO gateways knows where to send the calls? Or I just setup the FXO
gateway with the IP address of the * box?

Humberto Aicardi

-----Mensagem original-----
De: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] Em nome de Adi Linden
Enviada em: Wednesday, January 05, 2005 9:28 PM
Para: Asterisk Users Mailing List - Non-Commercial Discussion
Assunto: Re: [Asterisk-Users] chan_oh323 & gatekeeper

> 	Until now I have used only SIP & IAX2 with success and understand
> them pretty well. The point is that someone has asked me to configure an *
> box for them, the problem is that they want to use H.323. I have already
> compiled and tested the chan_oh323 with asterisk and works. The problem is
> that the tests need a gatekeeper, my question is: Do I need always need a
> gatekeeper? Or my FXO H.323 gateway can register with * ?

I have this in my extensions.conf. The oh323.conf has gatekeeper disabled
and nothing else specific to the 192.168.99.83. Works just fine to place
calls to a Cisco fxo gateway.

exten => s,3,Dial(OH323/${ARG1}@192.168.99.83) ; H.323 Protocol

Adi
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users