[Asterisk-Users] Vonage <---> Asterisk Complete Config

[Jay Milk]

Must have missed a few messages :)  Vonage always allowed this on
"softphone" lines.  Those are $10/month with metered usage (100 min
included).  They also require a "hardline" (ATA) as the primary line on
the account.  It's a working crutch for those folks who need a DID in a
rate-center only vonage offers -- but that number, thankfully, is
decreasing.

> -----Original Message-----
> From: Randy Johnson [mailto:Techlists at paperlesspractice.com] 
> Sent: Friday, February 25, 2005 6:27 AM
> To: nitesh at vipernetworks.com; Asterisk Users Mailing List - 
> Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Vonage <---> Asterisk Complete Config
> 
> 
> I thought Vonage did not allow this?
> 
> 
> -Randy
> 
> 
> Nitesh Divecha wrote:
> 
> >Hello Asterisk Users,
> >
> >After Brain storming for couple of hours, days, and weeks, 
> finally got 
> >Asterisk to work with Vonage for Inbound and Outbound calls.
> >
> >Requirement: -
> >1) Vonage Softphone account
> >2) Asterisk
> >3) Couple of SIP Phones
> >
> >Here is my sip.conf
> >
> >[general]
> >port = 5060           ; Port to bind to (SIP is 5060)
> >bindaddr = <<Local IP>>    ; Address to bind to (all 
> addresses on machine)
> >context=incoming
> >disallow=all
> >allow=ulaw
> >allow=alaw
> >allow=g729
> >allow=g723
> >externip=<<External IP>>
> >localnet=<<Local IP>>
> >localmask=<<Local mask>>
> >nat=yes
> >
> >register=<<VonageDID>>:password at sphone.vopr.vonage.net:5061/202
> >
> >[vonage-out]
> >username=<<VonageDID>>
> >type=friend
> >secret=<<password>>
> >port=5061
> >nat=yes
> >host=sphone.vopr.vonage.net
> >fromuser=<<VonageDID>>
> >fromdomain=sphone.vopr.vonage.net
> >dtmfmode=rfc2833
> >auth=md5
> >
> >[vonage202]
> >username=<<VonageDID>>
> >type=friend
> >secret=<<password>>
> >port=5061
> >nat=yes
> >insecure=very
> >host=sphone.vopr.vonage.net
> >fromuser=<<VonageDID>>
> >fromdomain=sphone.vopr.vonage.net
> >dtmfmode=inband
> >context=from-pstn
> >canreinvite=no
> >auth=md5
> >
> >Here is my extension.conf
> >
> >[ext-did]
> >exten => <<VonageDID>,1,Goto(ext-local,202,1)
> >or 
> >exten => <<VonageDID>>,1,Goto(aa_1,s,1) If you are sending 
> the call to IVR.
> >
> >For some this configuration might vary as my Asterisk is behind NAT.
> >
> >Asterisk Rocks!!! Enjoy
> >
> >Many thanks to Jay & Dean
> >
> >Neel
> >
> >
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com 
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >  
> >
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/aster> isk-users
> To 
> UNSUBSCRIBE or update options visit:
>    
http://lists.digium.com/mailman/listinfo/asterisk-users