[Asterisk-Users] Vonage <---> Asterisk Complete Config

[Randy Johnson]

I thought Vonage did not allow this?


-Randy


Nitesh Divecha wrote:

>Hello Asterisk Users, 
>
>After Brain storming for couple of hours, days, and weeks, finally got
>Asterisk to work with Vonage for Inbound and Outbound calls.
>
>Requirement: -
>1) Vonage Softphone account
>2) Asterisk
>3) Couple of SIP Phones
>
>Here is my sip.conf
>
>[general]
>port = 5060           ; Port to bind to (SIP is 5060)
>bindaddr = <<Local IP>>    ; Address to bind to (all addresses on machine)
>context=incoming
>disallow=all
>allow=ulaw
>allow=alaw
>allow=g729
>allow=g723
>externip=<<External IP>>
>localnet=<<Local IP>>
>localmask=<<Local mask>>
>nat=yes
>
>register=<<VonageDID>>:password at sphone.vopr.vonage.net:5061/202
>
>[vonage-out]
>username=<<VonageDID>>
>type=friend
>secret=<<password>>
>port=5061
>nat=yes
>host=sphone.vopr.vonage.net
>fromuser=<<VonageDID>>
>fromdomain=sphone.vopr.vonage.net
>dtmfmode=rfc2833
>auth=md5
>
>[vonage202]
>username=<<VonageDID>>
>type=friend
>secret=<<password>>
>port=5061
>nat=yes
>insecure=very
>host=sphone.vopr.vonage.net
>fromuser=<<VonageDID>>
>fromdomain=sphone.vopr.vonage.net
>dtmfmode=inband
>context=from-pstn
>canreinvite=no
>auth=md5
>
>Here is my extension.conf
>
>[ext-did]
>exten => <<VonageDID>,1,Goto(ext-local,202,1) 
>or 
>exten => <<VonageDID>>,1,Goto(aa_1,s,1) If you are sending the call to IVR.
>
>For some this configuration might vary as my Asterisk is behind NAT. 
>
>Asterisk Rocks!!! Enjoy
>
>Many thanks to Jay & Dean
>
>Neel
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>