[Asterisk-Users] ZapTel Errors on boot

[Kyle Loree]

Ronald,

First step, try switching the modules around on your card.
I had the same issue and had to rma the module.

Kyle

On Feb 2, 2005, at 12:07 PM, Ronald Hartmann wrote:

> Erros on boot. Running Release 1 Latest Version.
>
> Feb  2 13:32:20 localhost kernel: Zapata Telephony Interface Registered
> on major 196
> Feb  2 13:32:20 localhost kernel: Freshmaker version: 71
> Feb  2 13:32:20 localhost kernel: Freshmaker passed register test
> Feb  2 13:32:29 localhost kernel: Module 0: Installed -- AUTO FXS/DPO
> Feb  2 13:32:29 localhost kernel: Timeout waiting for calibration of
> module 1
> Feb  2 13:32:29 localhost kernel: Timeout waiting for calibration of
> module 1
> Feb  2 13:32:29 localhost kernel: Proslic Failed on Second Attempt to
> Auto Calibrate
> Feb  2 13:32:29 localhost kernel: Module 1: Installed -- MANUAL FXS
> Feb  2 13:32:29 localhost kernel: Module 2: Installed -- AUTO FXO (FCC
> mode)
> Feb  2 13:32:29 localhost kernel: Module 3: Installed -- AUTO FXO (FCC
> mode)
>
>
> It used to boot no problem...
>
> Jan 17 14:51:12 localhost kernel: Zapata Telephony Interface Registered
> on major 196
> Jan 17 14:51:12 localhost kernel: Freshmaker version: 71
> Jan 17 14:51:12 localhost kernel: Freshmaker passed register test
> Jan 17 14:51:15 localhost kernel: Module 0: Installed -- AUTO FXS/DPO
> Jan 17 14:51:15 localhost kernel: Module 1: Installed -- AUTO FXS/DPO
> Jan 17 14:51:15 localhost kernel: Module 2: Installed -- AUTO FXO (FCC
> mode)
> Jan 17 14:51:15 localhost kernel: Module 3: Installed -- AUTO FXO (FCC
> mode)
>
> Is the card going Bad.  No Changes have been made to the Hardware and
> the Zaptel.conf is still the same as always
>
> fxoks=1
> fxoks=2
> fxsks=3
> fxsks=4
> loadzone=us
> defaultzone=us
>
> Zapata is still the same
>
> context=from-pstn
> signalling=fxo_ks
> faxdetect=incoming
> usecallerid=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> group=1
> channel=1
>
> context=from-pstn
> signalling=fxo_ks
> faxdetect=incoming
> usecallerid=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> group=1
> channel=2
>
>
> context=from-pstn
> signalling=fxs_ks
> ;rxgain=10.5
> ;txgain=-4.5
> faxdetect=incoming
> usecallerid=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> group=0
> channel=3
>
>
> context=from-pstn
> signalling=fxs_ks
> faxdetect=incoming
> usecallerid=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> group=0
> channel=4
>
>
>
> Not sure if I need to send the card back or not.
>
> Thanks for your consideration into this issue.
>
> Ron
>