[Asterisk-Users] ZapTel Errors on boot

[Ronald Hartmann]

Erros on boot. Running Release 1 Latest Version.

Feb  2 13:32:20 localhost kernel: Zapata Telephony Interface Registered
on major 196
Feb  2 13:32:20 localhost kernel: Freshmaker version: 71
Feb  2 13:32:20 localhost kernel: Freshmaker passed register test
Feb  2 13:32:29 localhost kernel: Module 0: Installed -- AUTO FXS/DPO
Feb  2 13:32:29 localhost kernel: Timeout waiting for calibration of
module 1
Feb  2 13:32:29 localhost kernel: Timeout waiting for calibration of
module 1
Feb  2 13:32:29 localhost kernel: Proslic Failed on Second Attempt to
Auto Calibrate
Feb  2 13:32:29 localhost kernel: Module 1: Installed -- MANUAL FXS
Feb  2 13:32:29 localhost kernel: Module 2: Installed -- AUTO FXO (FCC
mode)
Feb  2 13:32:29 localhost kernel: Module 3: Installed -- AUTO FXO (FCC
mode)


It used to boot no problem...

Jan 17 14:51:12 localhost kernel: Zapata Telephony Interface Registered
on major 196
Jan 17 14:51:12 localhost kernel: Freshmaker version: 71
Jan 17 14:51:12 localhost kernel: Freshmaker passed register test
Jan 17 14:51:15 localhost kernel: Module 0: Installed -- AUTO FXS/DPO
Jan 17 14:51:15 localhost kernel: Module 1: Installed -- AUTO FXS/DPO
Jan 17 14:51:15 localhost kernel: Module 2: Installed -- AUTO FXO (FCC
mode)
Jan 17 14:51:15 localhost kernel: Module 3: Installed -- AUTO FXO (FCC
mode)

Is the card going Bad.  No Changes have been made to the Hardware and
the Zaptel.conf is still the same as always

fxoks=1
fxoks=2
fxsks=3
fxsks=4
loadzone=us
defaultzone=us

Zapata is still the same

context=from-pstn
signalling=fxo_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=1
channel=1

context=from-pstn
signalling=fxo_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=1
channel=2


context=from-pstn
signalling=fxs_ks
;rxgain=10.5
;txgain=-4.5
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=0
channel=3


context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=0
channel=4



Not sure if I need to send the card back or not.

Thanks for your consideration into this issue.

Ron