[Asterisk-Users] How to check Digium TE410P firmware version?

[C F]

Use dmesg

On 12/27/05, Franz Wu <franz.wu at qleap.com.tw> wrote:
> I connect to Asterisk via SSH all the times. Did not notice about console
> messages about module loading.
>
> Thanks
>
> ----- Original Message -----
> From: "BJ Weschke" <bweschke at gmail.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Tuesday, December 27, 2005 10:24
> Subject: Re: [Asterisk-Users] How to check Digium TE410P firmware version?
>
>
> On 12/26/05, Franz Wu <franz.wu at qleap.com.tw> wrote:
> > Hi list
> > I have one TE410P and want to know how to. Sending back to Digium should
> > be
> > a good idea.
> >
>
>  When you load the wct4xxp module you'll see (1st Gen) or (2nd Gen)
> pop up which will indicate which version of the firmware the board is.
>
> --
> Bird's The Word Technologies, Inc.
> http://www.btwtech.com/
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>