[Asterisk-Users] How to check Digium TE410P firmware version?

[Franz Wu]

I connect to Asterisk via SSH all the times. Did not notice about console 
messages about module loading.

Thanks

----- Original Message ----- 
From: "BJ Weschke" <bweschke at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Tuesday, December 27, 2005 10:24
Subject: Re: [Asterisk-Users] How to check Digium TE410P firmware version?


On 12/26/05, Franz Wu <franz.wu at qleap.com.tw> wrote:
> Hi list
> I have one TE410P and want to know how to. Sending back to Digium should 
> be
> a good idea.
>

 When you load the wct4xxp module you'll see (1st Gen) or (2nd Gen)
pop up which will indicate which version of the firmware the board is.

--
Bird's The Word Technologies, Inc.
http://www.btwtech.com/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users