[Asterisk-Users] Asterisk with Uniden uip200
Steven Job
steve at wwwcrazy.com
Mon Dec 19 21:19:55 MST 2005
>> Which version of Asterisk are you using?
Version 1.2.1
Did you use a STUN server? Are you using NAT?
> I meant "qualify" not "quality" :)
I just set it to qualify=no.
It doesn't give me the error anymore of UNREACHABLE (which makes sense).
But I am also still not able to dial the extension of the phone.
-Steve
----- Original Message -----
From: "Waldo Rubinstein" <waldo at trianet.net>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Monday, December 19, 2005 11:04 PM
Subject: Re: [Asterisk-Users] Asterisk with Uniden uip200
>I meant "qualify" not "quality" :)
>
> - Waldo
>
> On Dec 19, 2005, at 11:02 PM, Waldo Rubinstein wrote:
>
>> I've found that I have to disable quality on the UIP200 when I switched
>> to Asterisk 1.2.X. It worked find with 1.0.9 and under. Which version of
>> Asterisk are you using?
>>
>> - Waldo
>>
>> On Dec 19, 2005, at 10:34 PM, Steven Job wrote:
>>
>>> Having the strangest time getting the uip200 to work with Asterisk.
>>> We can send outgoing calls, however we can not receive phone calls.
>>>
>>> I have tried listening to all of the recommendations in this list such
>>> as
>>> setting the nat=never in the sip.conf and that didn't work at all
>>> (phone
>>> stopped registering).
>>>
>>> Anyone want to be so kind and let me know what the heck we are doing
>>> wrong?
>>>
>>> The asterisk server is located on a static public IP.
>>> The uip200 phones are at a dynamic public IP (different location than
>>> the
>>> asterisk machine) but are behind a router using NAT.
>>>
>>>
>>> When the phone first authenticates we get:
>>>
>>> -- Registered SIP 'uip200-2a' at 141.156.50.142 port 64996 expires
>>> 3600
>>> Dec 19 22:26:59 NOTICE[5436]: chan_sip.c:11328 sip_poke_noanswer: Peer
>>> 'uip200-2a' is now UNREACHABLE! Last qualify: 0
>>>
>>>
>>> Then when you try to dial the extension of the phone we get:
>>>
>>> Dec 19 22:29:01 NOTICE[16860]: app_dial.c:1010 dial_exec_full: Unable
>>> to
>>> create channel of type 'SIP' (cause 3 - No route to destination)
>>> == Everyone is busy/congested at this time (1:0/0/1)
>>>
>>>
>>> Thanks for any help!
>>> -Steve
>>>
>>>
>>>
>>> ------sip.conf ------------------
>>>
>>> [uip200-2a]
>>> type=friend
>>> secret=verysecret
>>> nat=yes ; have also tried nat=never and nat=route
>>> host=dynamic
>>> reinvite=no
>>> canreinvite=no
>>> qualify=1000
>>> dtmfmode=auto ; Choices are inband, rfc2833, or info
>>> dtmf=auto
>>> disallow=all
>>> allow=ulaw
>>> allow=alaw
>>> context=internal
>>>
>>>
>>>
>>> ----------------- unidencom.txt ---------------------------------------
>>>
>>> # UIP200 Mass Configuration System Generic File
>>> # Notes:
>>> # 1. Lines start with '#' are comments
>>> # 2. To leave a field value unchanged (as saved on local phone), leave
>>> value
>>> to blank.
>>> # 3. To set a field's value to empty, use '-' as value.
>>> # 4. To NOT overwrite user local settings of: programmable key, one/two
>>> touch keys, VMA
>>> # number, VMWILampIndicator, set "OverwriteLocalSetting = NO".
>>> Default is
>>> "YES". This
>>> # key will ALSO affect whether or not THESE settings in
>>> uniden<MAC>.txt
>>> be used.
>>> # 5. Any duplicate parameters exist in both unidencom.txt and
>>> uniden<MAC>.txt, MAC settings
>>> # will be used.
>>> # MAXIMUM FILE SIZE IS 10KB
>>> # Current Limitation: No spaces allowed for a setting's value
>>> # Version: BS4.70
>>>
>>>
>>> #Overwrite user local settings of programmable keys, one/two touch
>>> keys, vma
>>> settings
>>> #If set to no, these current settings on the phone will not be
>>> overwritten.
>>> OverwriteLocalSettings YES # must be placed on top of config
>>> file
>>>
>>> # Sip Settings --If only ProxyServer needed, set OutboundProxy1/ Port
>>> same as
>>> ProxyServer/Port
>>> ProxyServer serveraddress # can be an IP address
>>> or
>>> FDQN
>>> ProxyServerPort 0 # 0 to use default port
>>> OutboundProxy1 serveraddress # can be an IP address
>>> or
>>> FQDN
>>> OutboundProxy1Port 0 # enter a port number or
>>> 0
>>> for default (5060)
>>> #OutboundProxy2 192.168.0.2 # can be an IP address
>>> or
>>> FQDN
>>> #OutboundProxy2Port 0 # enter a port number or 0 for
>>> default
>>> (5060)
>>> #EmergencyProxy 192.168.1.102
>>> #EmergencyProxyPort 0
>>> Registrar1 serveraddress # can be an IP
>>> address
>>> or FQDN
>>> Registrar1Port 0 # enter a port number or
>>> 0
>>> for default (5060)
>>> #Registrar2 10.15.15.127 # can be an IP address
>>> or
>>> FQDN
>>> #Registrar2Port 0 # enter a port number
>>> or 0
>>> for default (5060)
>>>
>>> RegisterExpireSec 3600
>>> Q_Param 50
>>> RegisterExpireLimitPercent 10
>>> Register403RetrySec 1200
>>> SipPort 5060
>>> SRVRecordName - #_sip._udp.uniden.com
>>>
>>> FailoverRetrySec 4 # For Redundant Outbound proxy server
>>>
>>> #InterDigitTimer Value in milli seconds (minimum is 1000ms = 1Second)
>>> InterDigitTimer 4000
>>>
>>> # options are ON or OFF
>>> SessionTimerSupport ON
>>>
>>> # options are ON or OFF
>>> SessionTimerRefresher ON
>>> SessionTimerMin 60
>>> TimerInterval0 300
>>> TimerInterval1 150
>>>
>>>
>>> # Audio Settings
>>> G711MuTxPacketLength 20
>>> G711MuJitterBufferLength 10
>>> G711MuJitterBufferMax 200
>>> G711ATxPacketLength 20
>>> G711AJitterBufferLength 10
>>> G711AJitterBufferMax 200
>>> G729TxPacketLength 20
>>> G729JitterBufferLength 10
>>> G729JitterBufferMax 200
>>> LongHoldAlertPeriod 360
>>> RTPPortBase 25000
>>>
>>> # options are ENABLE and DISABLE
>>> DiffServMode ENABLE
>>> DefaultDiffServParam 40
>>> RTPDiffServParam 41
>>>
>>> # options are TRUNKMODE, CASCADEMODE, DISABLE
>>> VlanMode DISABLE
>>> VlanID 1
>>> PcVlanID 2
>>>
>>> #SNTP Settings
>>> # choices are YES and NO
>>> EnableSNTP yes
>>> # SNTP Server IP address
>>> SntpServerIP 192.5.41.40
>>> TimeZone -6 # -6 For Central Time Zone
>>> # choices are YES and NO
>>> EnableDST YES
>>> # Time period (in seconds) before recontacting SNTP server
>>> SntpRetrySec 1800
>>>
>>> # preferred codec are listed from most preferred, separated by commas
>>> and NO
>>> space
>>> PreferredCodec g711u,g711a,g729
>>>
>>> # choices are English, Spanish, and French
>>> Language English
>>>
>>> #choices are Enable and Disable
>>> CallWaiting Enable #
>>> EmergencyProxyPrefix **
>>>
>>> # STUN: If Server IP sis 0.0.0.0 STUN is disabled
>>> StunServerAddr 0.0.0.0 # stun.softjoys.com # stun.fwdnet.net
>>> # I
>>> have tried both of theve stun servers
>>> StunServerPort 0 # 3478 # i have tried the port 3478 also
>>> #Periodic update in seconds of MEDIA NAT ports (minimum is 10 and set 0
>>> to
>>> disable)
>>> StunServerUpdateSec 0 # 30
>>> #Periodic update in seconds to keep SIP NAT port open (minimum is 10
>>> and set
>>> 0 to disable)
>>> StunServerNATKeepAliveSec 0 # 30
>>>
>>> # ALLOW IP DIALING with # as the first digit map
>>> DirectIpDialing Enable #Enable/Disable
>>>
>>> # Set YES to AllowSharpAsDial to have # as your DIAL key.
>>> AllowSharpAsDial Yes #Yes/No
>>>
>>> #Flash Based Service Parameters:
>>> # DTMFFlashEvent (Enable/Disable) -- Send RFC2833 Event 16 when enabled
>>> and
>>> XFER button is pressed.
>>> DTMFFlashEvent Disable
>>> #HotLineDisplay (Enable/Disable) -- Do not display HOTLINE on LCD when
>>> Hotline Number is set
>>> HotLineDisplay Disable
>>>
>>> #User Agent Name Settings. Use Character "^" for space
>>> UseCustomizedUserAgentName No
>>> CustomizedUserAgentName Uniden^Customized^UA
>>>
>>>
>>> #Admin password must be numeric. Max is 6 digits. Format:
>>> oldpassword/newpassword
>>> #AdminPassword 1234/1111
>>>
>>> #end_of_file
>>>
>>>
>>>
>>>
>>>
>>> --------- uniden<mac>.txt ---------------
>>>
>>> # UIP200 Mass Configuration System Mac-based File
>>> # Notes: Lines start with '#' are comments
>>> # To leave a field value unchanged (as saved on local phone), leave
>>> value to
>>> blank.
>>> # To disable a field, use '-' as value
>>> # MAXIMUM FILE SIZE IS 10KB
>>> # Current Limitation: No spaces allowed for a setting's value
>>> # Version: BS4.70
>>>
>>>
>>> # Firmware. The items listed in this Firmware section must be in this
>>> order.
>>> # FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate
>>> is
>>> YES
>>> # FimrwareFileName only used if FirmwareVersion differ from firmware
>>> ver in
>>> Flash
>>> AutoFirmwareUpdate YES #choices are YES and NO
>>> FirmwareFileName uip200_470enc.pac
>>> FirmwareVersion BS4.70
>>>
>>>
>>> # Sip Settings
>>> MyLcdDisplay uip2a
>>> MyDialNumber uip200-2a
>>> DisplayName uip2a
>>> UserNameForProxy uip200-2a
>>> PasswordForProxy verysecret
>>> UserNameForRegistrar uip200-2a
>>> PasswordForRegistrar verysecret
>>>
>>> # Programmable Keys. Key functionality must go before key values.
>>> ProgrammableKey1 OneTouchDial
>>> ProgrammableKey2 OneTouchDial
>>> ProgrammableKey3 OneTouchDial
>>> ProgrammableKey4 CallForward
>>> ProgrammableKey5 TwoTouchDial
>>> ProgrammableKey6 DoNotDisturb
>>> ProgrammableKey7 VMA
>>> ProgrammableKey8 Mute
>>>
>>> # One and Two-touch keys. Must go after Programmable keys functionality
>>> definitions.
>>> # Refer to Programmable and Fixed Function Keys for usage guide
>>> # OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial
>>> OneTouchKey1 95558111111
>>> OneTouchKey2 5553456
>>> OneTouchKey3 3456
>>> OneTouchKey4 3457
>>> OneTouchKey5 18175553152
>>> OneTouchKey6 18175553152
>>> OneTouchKey7 18175553152
>>> OneTouchKey8 18175553152
>>>
>>> TwoTouchDigit0 3459
>>> TwoTouchDigit1 3450
>>> TwoTouchDigit2 4420
>>> TwoTouchDigit3 4421
>>> TwoTouchDigit4 4422
>>> TwoTouchDigit5 4423
>>> TwoTouchDigit6 4424
>>> TwoTouchDigit7 4425
>>> TwoTouchDigit8 4426
>>> TwoTouchDigit9 4427
>>>
>>> # Hotline and vmwi numbers --Must be placed after OneTouchDial's
>>> HotLineNumber -
>>> VmaDirectCallNo 3685 #value associating with VMA
>>> Programmable
>>> key.
>>> VmwiLampIndicator Enable
>>>
>>> TimeDisplay Enable
>>> ImportPhoneBook No
>>>
>>> #end of file
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> Asterisk-Users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list