[Asterisk-Users] Asterisk with Uniden uip200
Waldo Rubinstein
waldo at trianet.net
Mon Dec 19 21:04:48 MST 2005
I meant "qualify" not "quality" :)
- Waldo
On Dec 19, 2005, at 11:02 PM, Waldo Rubinstein wrote:
> I've found that I have to disable quality on the UIP200 when I
> switched to Asterisk 1.2.X. It worked find with 1.0.9 and under.
> Which version of Asterisk are you using?
>
> - Waldo
>
> On Dec 19, 2005, at 10:34 PM, Steven Job wrote:
>
>> Having the strangest time getting the uip200 to work with Asterisk.
>> We can send outgoing calls, however we can not receive phone calls.
>>
>> I have tried listening to all of the recommendations in this list
>> such as
>> setting the nat=never in the sip.conf and that didn't work at all
>> (phone
>> stopped registering).
>>
>> Anyone want to be so kind and let me know what the heck we are
>> doing wrong?
>>
>> The asterisk server is located on a static public IP.
>> The uip200 phones are at a dynamic public IP (different location
>> than the
>> asterisk machine) but are behind a router using NAT.
>>
>>
>> When the phone first authenticates we get:
>>
>> -- Registered SIP 'uip200-2a' at 141.156.50.142 port 64996
>> expires 3600
>> Dec 19 22:26:59 NOTICE[5436]: chan_sip.c:11328 sip_poke_noanswer:
>> Peer
>> 'uip200-2a' is now UNREACHABLE! Last qualify: 0
>>
>>
>> Then when you try to dial the extension of the phone we get:
>>
>> Dec 19 22:29:01 NOTICE[16860]: app_dial.c:1010 dial_exec_full:
>> Unable to
>> create channel of type 'SIP' (cause 3 - No route to destination)
>> == Everyone is busy/congested at this time (1:0/0/1)
>>
>>
>> Thanks for any help!
>> -Steve
>>
>>
>>
>> ------sip.conf ------------------
>>
>> [uip200-2a]
>> type=friend
>> secret=verysecret
>> nat=yes ; have also tried nat=never and nat=route
>> host=dynamic
>> reinvite=no
>> canreinvite=no
>> qualify=1000
>> dtmfmode=auto ; Choices are inband, rfc2833, or info
>> dtmf=auto
>> disallow=all
>> allow=ulaw
>> allow=alaw
>> context=internal
>>
>>
>>
>> ----------------- unidencom.txt
>> ---------------------------------------
>>
>> # UIP200 Mass Configuration System Generic File
>> # Notes:
>> # 1. Lines start with '#' are comments
>> # 2. To leave a field value unchanged (as saved on local phone),
>> leave value
>> to blank.
>> # 3. To set a field's value to empty, use '-' as value.
>> # 4. To NOT overwrite user local settings of: programmable key,
>> one/two
>> touch keys, VMA
>> # number, VMWILampIndicator, set "OverwriteLocalSetting = NO".
>> Default is
>> "YES". This
>> # key will ALSO affect whether or not THESE settings in
>> uniden<MAC>.txt
>> be used.
>> # 5. Any duplicate parameters exist in both unidencom.txt and
>> uniden<MAC>.txt, MAC settings
>> # will be used.
>> # MAXIMUM FILE SIZE IS 10KB
>> # Current Limitation: No spaces allowed for a setting's value
>> # Version: BS4.70
>>
>>
>> #Overwrite user local settings of programmable keys, one/two touch
>> keys, vma
>> settings
>> #If set to no, these current settings on the phone will not be
>> overwritten.
>> OverwriteLocalSettings YES # must be placed on top of
>> config file
>>
>> # Sip Settings --If only ProxyServer needed, set OutboundProxy1/
>> Port same as
>> ProxyServer/Port
>> ProxyServer serveraddress # can be an IP
>> address or
>> FDQN
>> ProxyServerPort 0 # 0 to use default
>> port
>> OutboundProxy1 serveraddress # can be an IP
>> address or
>> FQDN
>> OutboundProxy1Port 0 # enter a port
>> number or 0
>> for default (5060)
>> #OutboundProxy2 192.168.0.2 # can be an IP
>> address or
>> FQDN
>> #OutboundProxy2Port 0 # enter a port number or 0 for
>> default
>> (5060)
>> #EmergencyProxy 192.168.1.102
>> #EmergencyProxyPort 0
>> Registrar1 serveraddress # can be an
>> IP address
>> or FQDN
>> Registrar1Port 0 # enter a port
>> number or 0
>> for default (5060)
>> #Registrar2 10.15.15.127 # can be an IP
>> address or
>> FQDN
>> #Registrar2Port 0 # enter a port
>> number or 0
>> for default (5060)
>>
>> RegisterExpireSec 3600
>> Q_Param 50
>> RegisterExpireLimitPercent 10
>> Register403RetrySec 1200
>> SipPort 5060
>> SRVRecordName - #_sip._udp.uniden.com
>>
>> FailoverRetrySec 4 # For Redundant Outbound proxy server
>>
>> #InterDigitTimer Value in milli seconds (minimum is 1000ms = 1Second)
>> InterDigitTimer 4000
>>
>> # options are ON or OFF
>> SessionTimerSupport ON
>>
>> # options are ON or OFF
>> SessionTimerRefresher ON
>> SessionTimerMin 60
>> TimerInterval0 300
>> TimerInterval1 150
>>
>>
>> # Audio Settings
>> G711MuTxPacketLength 20
>> G711MuJitterBufferLength 10
>> G711MuJitterBufferMax 200
>> G711ATxPacketLength 20
>> G711AJitterBufferLength 10
>> G711AJitterBufferMax 200
>> G729TxPacketLength 20
>> G729JitterBufferLength 10
>> G729JitterBufferMax 200
>> LongHoldAlertPeriod 360
>> RTPPortBase 25000
>>
>> # options are ENABLE and DISABLE
>> DiffServMode ENABLE
>> DefaultDiffServParam 40
>> RTPDiffServParam 41
>>
>> # options are TRUNKMODE, CASCADEMODE, DISABLE
>> VlanMode DISABLE
>> VlanID 1
>> PcVlanID 2
>>
>> #SNTP Settings
>> # choices are YES and NO
>> EnableSNTP yes
>> # SNTP Server IP address
>> SntpServerIP 192.5.41.40
>> TimeZone -6 # -6 For Central Time Zone
>> # choices are YES and NO
>> EnableDST YES
>> # Time period (in seconds) before recontacting SNTP server
>> SntpRetrySec 1800
>>
>> # preferred codec are listed from most preferred, separated by
>> commas and NO
>> space
>> PreferredCodec g711u,g711a,g729
>>
>> # choices are English, Spanish, and French
>> Language English
>>
>> #choices are Enable and Disable
>> CallWaiting Enable #
>> EmergencyProxyPrefix **
>>
>> # STUN: If Server IP sis 0.0.0.0 STUN is disabled
>> StunServerAddr 0.0.0.0 # stun.softjoys.com #
>> stun.fwdnet.net # I
>> have tried both of theve stun servers
>> StunServerPort 0 # 3478 # i have tried the port 3478 also
>> #Periodic update in seconds of MEDIA NAT ports (minimum is 10 and
>> set 0 to
>> disable)
>> StunServerUpdateSec 0 # 30
>> #Periodic update in seconds to keep SIP NAT port open (minimum is
>> 10 and set
>> 0 to disable)
>> StunServerNATKeepAliveSec 0 # 30
>>
>> # ALLOW IP DIALING with # as the first digit map
>> DirectIpDialing Enable #Enable/Disable
>>
>> # Set YES to AllowSharpAsDial to have # as your DIAL key.
>> AllowSharpAsDial Yes #Yes/No
>>
>> #Flash Based Service Parameters:
>> # DTMFFlashEvent (Enable/Disable) -- Send RFC2833 Event 16 when
>> enabled and
>> XFER button is pressed.
>> DTMFFlashEvent Disable
>> #HotLineDisplay (Enable/Disable) -- Do not display HOTLINE on LCD
>> when
>> Hotline Number is set
>> HotLineDisplay Disable
>>
>> #User Agent Name Settings. Use Character "^" for space
>> UseCustomizedUserAgentName No
>> CustomizedUserAgentName Uniden^Customized^UA
>>
>>
>> #Admin password must be numeric. Max is 6 digits. Format:
>> oldpassword/newpassword
>> #AdminPassword 1234/1111
>>
>> #end_of_file
>>
>>
>>
>>
>>
>> --------- uniden<mac>.txt ---------------
>>
>> # UIP200 Mass Configuration System Mac-based File
>> # Notes: Lines start with '#' are comments
>> # To leave a field value unchanged (as saved on local phone),
>> leave value to
>> blank.
>> # To disable a field, use '-' as value
>> # MAXIMUM FILE SIZE IS 10KB
>> # Current Limitation: No spaces allowed for a setting's value
>> # Version: BS4.70
>>
>>
>> # Firmware. The items listed in this Firmware section must be in
>> this order.
>> # FirmwareVersion and FirmwareFileName only used if
>> AutoFirmwareUpdate is
>> YES
>> # FimrwareFileName only used if FirmwareVersion differ from
>> firmware ver in
>> Flash
>> AutoFirmwareUpdate YES #choices are YES and NO
>> FirmwareFileName uip200_470enc.pac
>> FirmwareVersion BS4.70
>>
>>
>> # Sip Settings
>> MyLcdDisplay uip2a
>> MyDialNumber uip200-2a
>> DisplayName uip2a
>> UserNameForProxy uip200-2a
>> PasswordForProxy verysecret
>> UserNameForRegistrar uip200-2a
>> PasswordForRegistrar verysecret
>>
>> # Programmable Keys. Key functionality must go before key values.
>> ProgrammableKey1 OneTouchDial
>> ProgrammableKey2 OneTouchDial
>> ProgrammableKey3 OneTouchDial
>> ProgrammableKey4 CallForward
>> ProgrammableKey5 TwoTouchDial
>> ProgrammableKey6 DoNotDisturb
>> ProgrammableKey7 VMA
>> ProgrammableKey8 Mute
>>
>> # One and Two-touch keys. Must go after Programmable keys
>> functionality
>> definitions.
>> # Refer to Programmable and Fixed Function Keys for usage guide
>> # OneTouchKeyX value is used ONLY when ProgrammableKeyX is
>> OneTouchDial
>> OneTouchKey1 95558111111
>> OneTouchKey2 5553456
>> OneTouchKey3 3456
>> OneTouchKey4 3457
>> OneTouchKey5 18175553152
>> OneTouchKey6 18175553152
>> OneTouchKey7 18175553152
>> OneTouchKey8 18175553152
>>
>> TwoTouchDigit0 3459
>> TwoTouchDigit1 3450
>> TwoTouchDigit2 4420
>> TwoTouchDigit3 4421
>> TwoTouchDigit4 4422
>> TwoTouchDigit5 4423
>> TwoTouchDigit6 4424
>> TwoTouchDigit7 4425
>> TwoTouchDigit8 4426
>> TwoTouchDigit9 4427
>>
>> # Hotline and vmwi numbers --Must be placed after OneTouchDial's
>> HotLineNumber -
>> VmaDirectCallNo 3685 #value associating with VMA
>> Programmable
>> key.
>> VmwiLampIndicator Enable
>>
>> TimeDisplay Enable
>> ImportPhoneBook No
>>
>> #end of file
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list