[Asterisk-Users] Polycom 501 remapping keys

[Bill Gibbs]

Yeah I just got in a 301 to test and I can configure a key (for example
in sip.cfg  key.IP_300.2.function.prim="Messages"/> and then when I hit
the line 2 key it drops me right into VM (since I have that configured
too)

Still playing around, I noticed that if you get the soft keys (the menu
ones under the LCD) then it ALWAYS is that function...

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Matthew
Sent: Friday, December 09, 2005 9:06 AM
To: a0305292 at unet.univie.ac.at; Asterisk Users Mailing List -
Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom 501 remapping keys

There has been a fair amount of converstaion about this, but I'm not 
sure anyone really has this working.  I had exactly the same problem 
that the button got remapped to a volume up function.  The only button 
remapping I got working was to map the Transfer button to the # key so 
that when you hit Transfer it started and Asterisk based transfer.

I would love to hear from someone who has this working.

Matthew O'Connor



a0305292 at unet.univie.ac.at wrote:
> I've tried to configure the "services"-key on my Polycom 501 to run a
SpeedDial-entry in [MACADRESS]-directory.xml (which would call a
asterisk-extension that starts SayUnixTime) but i have not been able to
accomplish my goal. Whe configuring the SpeedDial-function in sip.cfg
"VolUp" is started when i press the Services-Key.
>
> Also some other possible functions listed under 4.6.1.15 in the SIP
1.6 Administrator Guide fail. Some of them were working with the
expected function, some where not giving any response at all but some
where starting totally different functions, e.g. configuring "Redial" as
the function starts "Settings", function "Messages" starts "Redial",
"SpeedDialMenu" starts "VolUp", "VolUp" starts "Line1" :-[ 
>
> I've seen that other failed as well
(http://lists.digium.com/pipermail/asterisk-users/2005-October/130129.ht
ml) - anyone ever got this working? Maybe with BootROM 3.0/3.1? Or
should i downgrade to 1.5 where there was a ipmid-file for
remapping-info...?
>
> I'm running Firmware 1.6.2.0041/BootROM 2.6.2.0032
>
> regards
> Christian
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>   

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users