[Asterisk-Users] Asterisk on PPC & chan_capi issue

[Patrick]

On Thu, 2005-12-08 at 08:47 +0000, David Waugh wrote:
> Hello Patrick,
> 
> I have an Eicon Diva PRI-30M card and use the Eicon Linux drivers with chan_capi_cm.
> I am able to do ISDN to SIP calls with this.
> 
> Have you tried using the Eicon drivers instead, rather than zaptel and zib pri.
> 
> Instruction for doing this can be found here:
> http://www.voip-info.org/wiki/view/Asterisk+Eicon+Diva+CAPI+ISDN
> 
> I hope this help

Unfortunately not. The config I described below works fine on an Intel
server. The box showing the issue is a PPC box. The author of
chan_capi-cm doesn't think there is anything wrong with chan_capi-cm on
PPC and the way it behaves in the logfiles below. So the problem seems
to be Asterisk & PPC related but I have no idea how to track down the
issue or solve it.

Regards,
Patrick

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Patrick
> Sent: 06 December 2005 01:40
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Asterisk on PPC & chan_capi issue
> 
> 
> Hi all,
> 
> I have a PPC box (IBM RS6000 43P-150, bigendian afaik) which runs Fedora
> Core 5 Test1 and zaptel, libpri and asterisk 1.2.0. I also installed
> chan_capi (0.6.1) so I can use my Eicon Diva Server BRI card. Asterisk
> was compiled with DEBUG=-g and DEBUG_THREADS = -DDUMP_SCHEDULER
> -DDEBUG_SCHEDULER-DDEBUG_THREADS -DDO_CRASH -DDETECT_DEADLOCKS. Next I
> did make clean, make valgrind, make install. Asterisk runs as user/group
> asterisk/asterisk.
> 
> SIP <--> SIP calls are fine, Calls from SIP out to the PSTN via
> CAPI/ISDN are fine too. ISDN/CAPI --> SIP calls don't work. Example
> output of the issue is below. Anyone have an idea how I fix this?
> 
> Thanks and regards,
> Patrick
> 
> 
> chan_capi registers fine:
> **********************************************************************
>  [chan_capi.so] => (Common ISDN API for Asterisk)
>   == This box has 1 capi controller(s).
>   == Reading config for BRI1
>     -- ast_capi_pvt BRI1-pseudo-D (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128)
>     -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128)
>     -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128)
>     -- listening on contr1 CIPmask = 0x1fff03ff
>   == Registered channel type 'CAPI' (Common ISDN API Driver ($Revision:
> 1.115 $) )
>   == Registered application 'capiCommand'
>   == Registered custom function VANITYNUMBER
> 
> Call from my GSM to a SIP phone (exten 1003) via ISDN/CAPI (MSN2):
> **********************************************************************
>   == BRI1: Incoming call '<my GSM>' -> '<MSN2>'
> 
>     -- Executing Macro("CAPI/BRI1/<MSN2>-0", "stdexten|1003|SIP/1003")
> in new stack
>     -- Executing Dial("CAPI/BRI1/<MSN2>-0", "SIP/1003|10|TtwW") in new
> stack
> Dec  6 02:30:47 WARNING[28889]: channel.c:2494 ast_request: No
> translator path exists for channel type SIP (native 65535) to 0
> Dec  6 02:30:47 NOTICE[28889]: app_dial.c:1011 dial_exec_full: Unable to
> create channel of type 'SIP' (cause 0 - Unknown)
>   == Everyone is busy/congested at this time (1:0/0/1)
>     -- Executing Goto("CAPI/BRI1/<MSN2>-0", "s-CHANUNAVAIL|1") in new
> stack
>     -- Goto (macro-stdexten,s-CHANUNAVAIL,1)
>     -- Executing Goto("CAPI/BRI1/<MSN2>-0", "s-NOANSWER|1") in new stack
>     -- Goto (macro-stdexten,s-NOANSWER,1)
>     -- Executing Answer("CAPI/BRI1/<MSN2>-0", "") in new stack
>   == BRI1: Answering for 703241494
>     -- Executing Wait("CAPI/BRI1/<MSN2>-0", "1") in new stack
> Dec  6 02:30:47 NOTICE[28889]: channel.c:1893 ast_read: Dropping
> incompatible voice frame on CAPI/BRI1/<MSN2>-0 of format alaw since our
> native format has changed to unknown
> Dec  6 02:30:47 NOTICE[28889]: channel.c:1893 ast_read: Dropping
> incompatible voice frame on CAPI/BRI1/<MSN2>-0 of format alaw since our
> native format has changed to unknown
> 
> [snipped tons more of these]
> 
> Dec  6 02:30:48 NOTICE[28889]: channel.c:1893 ast_read: Dropping
> incompatible voice frame on CAPI/BRI1/<MSN2>-0 of format alaw since our
> native format has changed to unknown
>     -- Executing VoiceMail("CAPI/BRI1/<MSN2>", "u1003") in new stack
> Dec  6 02:30:48 WARNING[28889]: channel.c:2313 set_format: Unable to
> find a codec translation path from unknown to gsm
> Dec  6 02:30:48 WARNING[28889]: file.c:820 ast_streamfile: Unable to
> open vm-theperson (format unknown): No such file or directory
>   == BRI1: CAPI Hangingup
>        > CAPI INFO 0x3490: Normal call clearing
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users