[Asterisk-Users] Asterisk on PPC & chan_capi issue

[David Waugh]

Hello Patrick,

I have an Eicon Diva PRI-30M card and use the Eicon Linux drivers with chan_capi_cm.
I am able to do ISDN to SIP calls with this.

Have you tried using the Eicon drivers instead, rather than zaptel and zib pri.

Instruction for doing this can be found here:
http://www.voip-info.org/wiki/view/Asterisk+Eicon+Diva+CAPI+ISDN

I hope this helps

Thanks David

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Patrick
Sent: 06 December 2005 01:40
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Asterisk on PPC & chan_capi issue


Hi all,

I have a PPC box (IBM RS6000 43P-150, bigendian afaik) which runs Fedora
Core 5 Test1 and zaptel, libpri and asterisk 1.2.0. I also installed
chan_capi (0.6.1) so I can use my Eicon Diva Server BRI card. Asterisk
was compiled with DEBUG=-g and DEBUG_THREADS = -DDUMP_SCHEDULER
-DDEBUG_SCHEDULER-DDEBUG_THREADS -DDO_CRASH -DDETECT_DEADLOCKS. Next I
did make clean, make valgrind, make install. Asterisk runs as user/group
asterisk/asterisk.

SIP <--> SIP calls are fine, Calls from SIP out to the PSTN via
CAPI/ISDN are fine too. ISDN/CAPI --> SIP calls don't work. Example
output of the issue is below. Anyone have an idea how I fix this?

Thanks and regards,
Patrick


chan_capi registers fine:
**********************************************************************
 [chan_capi.so] => (Common ISDN API for Asterisk)
  == This box has 1 capi controller(s).
  == Reading config for BRI1
    -- ast_capi_pvt BRI1-pseudo-D (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128)
    -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128)
    -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128)
    -- listening on contr1 CIPmask = 0x1fff03ff
  == Registered channel type 'CAPI' (Common ISDN API Driver ($Revision:
1.115 $) )
  == Registered application 'capiCommand'
  == Registered custom function VANITYNUMBER

Call from my GSM to a SIP phone (exten 1003) via ISDN/CAPI (MSN2):
**********************************************************************
  == BRI1: Incoming call '<my GSM>' -> '<MSN2>'

    -- Executing Macro("CAPI/BRI1/<MSN2>-0", "stdexten|1003|SIP/1003")
in new stack
    -- Executing Dial("CAPI/BRI1/<MSN2>-0", "SIP/1003|10|TtwW") in new
stack
Dec  6 02:30:47 WARNING[28889]: channel.c:2494 ast_request: No
translator path exists for channel type SIP (native 65535) to 0
Dec  6 02:30:47 NOTICE[28889]: app_dial.c:1011 dial_exec_full: Unable to
create channel of type 'SIP' (cause 0 - Unknown)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing Goto("CAPI/BRI1/<MSN2>-0", "s-CHANUNAVAIL|1") in new
stack
    -- Goto (macro-stdexten,s-CHANUNAVAIL,1)
    -- Executing Goto("CAPI/BRI1/<MSN2>-0", "s-NOANSWER|1") in new stack
    -- Goto (macro-stdexten,s-NOANSWER,1)
    -- Executing Answer("CAPI/BRI1/<MSN2>-0", "") in new stack
  == BRI1: Answering for 703241494
    -- Executing Wait("CAPI/BRI1/<MSN2>-0", "1") in new stack
Dec  6 02:30:47 NOTICE[28889]: channel.c:1893 ast_read: Dropping
incompatible voice frame on CAPI/BRI1/<MSN2>-0 of format alaw since our
native format has changed to unknown
Dec  6 02:30:47 NOTICE[28889]: channel.c:1893 ast_read: Dropping
incompatible voice frame on CAPI/BRI1/<MSN2>-0 of format alaw since our
native format has changed to unknown

[snipped tons more of these]

Dec  6 02:30:48 NOTICE[28889]: channel.c:1893 ast_read: Dropping
incompatible voice frame on CAPI/BRI1/<MSN2>-0 of format alaw since our
native format has changed to unknown
    -- Executing VoiceMail("CAPI/BRI1/<MSN2>", "u1003") in new stack
Dec  6 02:30:48 WARNING[28889]: channel.c:2313 set_format: Unable to
find a codec translation path from unknown to gsm
Dec  6 02:30:48 WARNING[28889]: file.c:820 ast_streamfile: Unable to
open vm-theperson (format unknown): No such file or directory
  == BRI1: CAPI Hangingup
       > CAPI INFO 0x3490: Normal call clearing

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users