[Asterisk-Users] How to shorten ringing stop detection on X101Pclone?

[f6hqz-m at hamwlan.net]

Hello Goran,

Modify your /etc/asterisk/zapata.conf like this :

busydetect=yes
busycount=3

And, of course, you must have chosen your correct country for ringing mode
in your /etc/zaptel.conf file :

loadzone=fr
defaultzone=fr

I am in France  :-)

Good luck !

Best Regards,
Francois BERGERET,
France.

-----Message d'origine-----
De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de Goran Dj.
Envoyé : jeudi 1 septembre 2005 02:26
À : Asterisk Users Mailing List - Non-Commercial Discussion
Objet : [Asterisk-Users] How to shorten ringing stop detection on
X101Pclone?


When x101p clone receive ring signal from phone line, my voip phone start
ringing. But, if caller hang-up at some time, phone continues to ringing 10
second more. How can I shorten that time?

Pause betwen incoming rings on my phone line is 4s, so when x101p clone
(wcfxo driver) do not receive next ring signal after 4.5 sec, call should be
consider as ended.

What should I change to set that time (4.5 sec) for incoming ring end
detection?


_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users