[Asterisk-Users] no sound with red alarm?

[Damon Estep]

Do you have any other zaptel hardware in the machine?

 

Sangoma did confirm this was an issue that was corrected in beta13 of
the the wanpipe drivers.

 

Asterisk does require a timing source, either a zaptel card or ztdummy
to function correctly.

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chad
Osmond
Sent: Friday, August 26, 2005 9:07 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] no sound with red alarm?

 

I have had no issues where asterisk is affected by a Sangoma card being
down.

I ran my test server like that for a few weeks doing lots of testing
before I brought it up with a dummy card. Even now, if it's up or down
it doesn't matter to asterisk.

 

Chad

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Damon
Estep
Sent: August 25, 2005 10:20 PM
To: Asterisk-Users at lists.digium.com
Subject: [Asterisk-Users] no sound with red alarm?

Does it make sense that a system with a single PRI (sangoma card) would
loose its ability to play sounds when not connected to the PSTN for
clock?

 

Is there a way to configure ztdummy as a BACKUP clock source, or is
there a better way altogether?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050828/3c70f963/attachment.htm