[Asterisk-Users] OH323 with Asterisk@home - seems incomplete

[Jason Becker]

Abdel Rahman Tarzi wrote:

> I installed oh323 and everything seemed to go smoothly (compile & 
> everything upto calling through using oh323).
>
> I must admit, there is some behavior that’s doesn’t seem right but 
> generally, I’m able to dial-out of any oh323 device whether to an 
> extension or to a trunk. Audio is sometimes muted when dialing out 
> until the extension or dialed number answers. Sound quality is good 
> when it’s there.
>
> Following the install, I do not seem to have the option to create an 
> oh323 extension or trunk. Something that I need to do.
>
> I realize it’s possible to edit the .conf but I needed to ask whether 
> this was “normal” – doesn’t seem like it is to me.
>
> Naturally, I’m apprehensive that editing the .conf files manually may 
> be overwritten by AMP, but even if not, it would seem like it 
> should’ve been the norm to have “added” an entry like oh323 to SIP, 
> IAX2 etcetera types of trunks. Also, extension types (which work from 
> a drop-down list) should have been modified.
>
> I would appreciate if someone familiar with the application could 
> inform whether this is “normal” before I attempt to add extensions and 
> trunks manually.
>
>  
>
I apologize for spamming the list... I failed to mention that Custom 
Trunks support exists in the current version of AMP (1.10.008). Here is 
the text from the "Custom Dial String" tooltip:

Define the custom Dial String. Include the token $OUTNUM$ wherever the 
number to dial should go.

examples:

CAPI/XXXXXXXX:b$OUTNUM$,30,r
H323/$OUTNUM$@XX.XX.XX.XX
OH323/$OUTNUM$@XX.XX.XX.XX:XXXX
vpb/1-1/$OUTNUM$

-- 
Jason Becker
Director & CEO
Coalescent Systems Inc.
Enabling Open Source Telephony
403.244.8089
www.coalescentsystems.ca